Submit a partner model run to the queue and return immediately.
Comfy Router’s queued delivery mode. The request body is the same partner-native JSON input POST /v2/models/{provider}/{model} accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers 201 with a handle, and the caller collects the result later through the three reads below.
POST
/
v2
/
models
/
{provider}
/
{model}
/
requests
Submit a partner model run to the queue and return immediately.
Bearer token authentication. Normally a Firebase or Cloud JWT. A 'comfyui-' prefixed API key is also accepted in this header: the prefix classifies the value as an API key and it is validated exactly as if it had been sent in X-API-Key.
Caller-generated key that makes retrying one logical call safe. A call that reached the caller with an answer is recorded against its key for 24 hours, and a retry carrying the same key is answered from that record instead of dispatching - and charging - the provider a second time, marked Idempotent-Replayed: true. Keys are scoped to the workspace your credential carries, or to your user when it carries none - so the keyspace is shared by every member of a workspace rather than private to one caller. Make a key unique across the whole workspace, not just within your own client: a second member who reuses a key string is answered from the first member's record, or refused 409 if the request differs. Because the scope follows the credential and not the person, a credential that carries no workspace at all scopes to your user id instead - so retrying one logical call under a different credential can land in a different namespace, where it is dispatched and charged again. Retry with the credential you started with. A keyed request with no authenticated caller is refused 401. The guarantee is a billing one: a key is charged at most once. It is not a promise that a key is dispatched at most once, and it does not make a lost call resumable. Some answers are recorded but not replayable for the full 24 hours, and the billing guarantee is the half that always holds: the key stays consumed - the retry never re-runs and never re-charges - but it is answered 409 invalid_input instead of being served the original body. That happens whenever Comfy does not hold a copy of the response it can still stand behind; a response past the replay size cap and a result addressed by an asset URL Comfy does not host are the two you are most likely to meet. The second is the one worth planning for, because it looks like an ordinary success: which models answer with a Comfy-hosted asset link, how long one stays valid, and what a result carries when an individual asset could not be copied are stated in one place, under Result assets in the API reference, and this paragraph does not restate them. On a model that returns its result on the original call, an answer still holding a partner's own asset link is replayed for a few minutes - which is where a dropped connection puts an SDK's automatic same-key re-send, and while the partner's link is certainly still alive - and refused after that rather than replayed dead. So a prompt retry of a partially re-hosted result behaves exactly like any other replay, and only a later one meets the 409. That short window is deliberately not offered on a model that submits and is polled, because there the partner may have minted the URL long before your call collected it and its remaining life is unknowable - and those models do not need it: a call cut off mid-generation keeps its key holding the generation, so the same-key retry collects the original result rather than a recorded copy of it. A response past the size cap has no window either and is refused from the start. The action on any of these 409 invalid_input refusals is the same: use a new key. Only an answer a provider actually produced is recorded, though. A refusal Router raises on its own before dispatching anything - not enabled for you yet (403), unknown model (404), not entitled to the model (403), a body the model's schema rejects or that names a different model than the path (422), a malformed request (400 invalid_input) - dispatched nothing and charged nothing, so it releases the key: re-send the same key once you are on the rollout ramp or have corrected the request and it runs for real, rather than replaying the refusal or colliding with it as a 409. That turns on whether a provider was reached, never on the status, so a 400 content_policy_violation - the partner's own answer to a call that ran, which some models meter - is recorded and replayed like any other answer. Releasing a refusal that dispatched nothing frees nothing chargeable, so it does not weaken the at-most-once billing guarantee above.
Lowercase provider segment of the canonical {provider}/{model} model ID - the partner whose model is being run.
Lowercase provider segment of the canonical {provider}/{model} model ID - the partner whose model is being addressed. The invocation route's provider path parameter and a catalog entry's provider field both reference this one schema, which is what keeps the listed IDs and the accepted IDs from drifting apart.
Lowercase model segment of the canonical {provider}/{model} model ID - the model to run within that provider.
Lowercase model segment of the canonical {provider}/{model} model ID - the model to run within that provider. Shared by the invocation route's model path parameter and a catalog entry's model field, for the same no-drift reason as RouterProviderSegment.
Selects an alternate provider to serve this model, instead of its current default. Omitting it runs native dispatch on the model's own default provider; default, comfy, and comfyui are aliases for that same native behavior and name no override, because Comfy Router is never itself a serving backend. The alternate providers Router can retarget a model onto are fal, wavespeed, runware, and higgsfield; which of them a given model supports is reported by GET /v2/models/{provider}/{model}. When an alternate provider is selected, the native request body is translated into that provider's real schema unless strict_mode=true; see strict_mode and fallback_provider. Its refusals are checked in a fixed order, and an earlier one answers whether or not a later one would. A value that is not a registered provider at all is refused 400 with error_type: invalid_input. Then a workspace configured for direct provider calls only refuses any non-default model_provider with 403 and error_type: forbidden, and Router never runs its fallback_provider retry for it; a resubmit carrying the Idempotency-Key of a request already accepted is answered as a replay of that request rather than refused. Then a request whose body selects a multipart operation (an edit - for example gpt-image's image field) is refused 409, also with error_type: invalid_input, whose detail begins "this request's image selects the edit operation" - but only when the named provider's translator for this model cannot itself serve that operation; a leg whose translator does carry the media is not refused and proceeds normally, so this is a per-leg refusal rather than a blanket one. Then a request that has already resolved a bring-your-own-key credential for the provider in the path is refused 409, also with error_type: invalid_input, whose detail begins this request resolved a BYOK credential - see the 409 on this route, where that detail is the only thing separating this case, and the multipart case above, from the Idempotency-Key one. That BYOK check runs whether or not the named provider has a leg for this model. Then the named provider's own gate refuses 403 with error_type: not_enabled when that provider is not turned on for you, and 503 with error_type: service_unavailable when the gate cannot be evaluated - a flag-evaluation failure, or a missing or nil gate entry. Only past all of those is a real provider that does not serve this model refused 400 with error_type: invalid_input, the same answer as a value that is not a registered provider at all - both mean the model_provider value cannot serve this model, and that 400's detail is human-readable and not a contract, so read GET /v2/models/{provider}/{model} to learn which providers a model does support rather than parsing it. Then, on a Seedance 2.x model, a body carrying an asset:// reference in any content[] image, video or audio url is refused 400 with error_type: invalid_input: those ids are BytePlus virtual-library assets no other provider can serve, so send the media itself as an http(s) URL or a data: URI to use model_provider. Past those 400s, this workspace's partner-provider policy for the named vendor is evaluated too and can refuse 403 or 503 of its own. Neither this parameter nor fallback_provider is available on a BYOK request, and the two are unavailable in different ways: the credential was resolved for the provider named in the path while every alternate leg dispatches on Comfy's own key, so an explicit model_provider is refused with that 409, and fallback_provider is inert rather than refused - no retry against an alternate provider is attempted and the first attempt's own failure is what the caller receives. The same split applies to a multipart body: only an explicit model_provider reaches the 409 above, and only for a leg whose translator cannot serve the operation, while the automatic on-failure retry fallback_provider controls is simply skipped (inert, not refused) for any multipart body. Router defines no provider_not_available or validation_errorerror_type: these conditions fold onto invalid_input. The error_type set can still grow, so treat any value you do not recognize as internal_error rather than switching exhaustively.
Only meaningful together with model_provider. false (the default): the request body must be this model's own native contract, translated to the alternate provider's real schema - any native field that cannot be expressed exactly is dropped and disclosed via the response's X-Comfy-Router-Dropped-Params header, never silently. true: the body must already be the alternate provider's own real schema, passed through unmodified in both directions - no translation, so X-Comfy-Router-Dropped-Params is never sent, and provider fallback is disabled for the call because a body shaped for one provider cannot be replayed against another (see fallback_provider).
Opt in to refusing a top-level request-body field this model's input schema does not declare, rather than accepting it; nested fields are not checked, and nothing is refused for a model whose schema allows undeclared fields or has no authored schema, or on a queued submit sent with strict_mode=true.
请求体
application/json
The partner model's native JSON input, identical to the body the synchronous route accepts for this model, and it selects the operation and is metered the same way: the body's own fields choose which operation Router runs on a model that supports more than one (an input image switches an editable image model to image-to-image, which may be metered on its own rate; a Seedance first-frame image selects image-to-video and a reference image or clip selects reference-to-video). On native dispatch a Seedance request bills by the media kinds in content, not the roles: any video input bills as video-to-video, otherwise any image bills as image-to-video, otherwise text-to-video, except that a final render from a draft_task item bills as the operation of the Draft it renders, with some models charging the same rate for text-to-video and image-to-video; with model_provider selecting an alternate provider, each conditioned operation may be metered on that provider's own rate. The same provider-selection contract applies at dispatch: without model_provider, or with model_provider and strict_mode=false (the default), the body is the model's native document and is validated against the model's own input schema before the run is admitted, so a body the model would reject is a 422 here rather than a queued request that fails minutes later - a non-strict alternate-provider body is additionally translated into that provider's real schema at dispatch. With strict_mode=true the body must already be the alternate provider's own schema and is forwarded unchanged: native-schema validation is skipped, exactly as on the synchronous route (see model_provider and strict_mode).
A partner model's native JSON input document, forwarded to the provider as-is. Its concrete shape is owned by the partner rather than by Comfy, so this is an open object: Router does not narrow, rename, or re-envelope the fields. It is a named component (never an inline anonymous object) because ComfyUI's spec-driven codegen needs a class to generate.
响应
Created - the run was admitted to the queue. The body is the handle: the request_id, status: IN_QUEUE, a queue_position snapshot, and the status_url, response_url and cancel_url that address the rest of this request's lifetime. It is deliberately 201 and not 202: a queued request is a resource this call created and the three URLs address it, whereas the 202 on the result read below means "not ready yet, ask again" and creates nothing.
The handle returned when a run is admitted to the queue: the request's identity and state, composed with the three URLs that address the rest of its lifetime.
The state of a queued Router request. It has exactly three values, and unlike RouterErrorType this one is a closed enum, because the two schemas are closed in opposite directions on purpose. RouterErrorType classifies failures and its set is expected to grow, so a generated client that hard-rejected an unrecognised bucket would fail hardest exactly when something had already gone wrong. This one is a lifecycle, and a lifecycle with a fourth state added later is a breaking change to every polling loop written against it whether it is declared as an enum or not - so it is declared as one, and the constraint is stated where a client can see it.
The pre-flight cost estimate for this request, present on a fresh admission when the cost estimate is enabled for the caller. It quotes the provider leg this request was pinned to (the queue has no fallback loop, so fallback_provider never changes the leg that runs). When no figure can be given it is still present, with source: unknown; the submission never fails because of the estimate. Omitted on an idempotent replay (Idempotent-Replayed: true), because the original quote is not stored. It is an estimate, not the final charge, and not a price lock: the run is charged at the rates in force when it is rated, and the settled charge in your workspace's usage and billing records is final.
{"docsConfig":{"theme":"mint","$schema":"https://mintlify.com/docs.json","name":"ComfyUI","colors":{"primary":"#49378B","light":"#F2FF59","dark":"#F2FF59"},"logo":{"light":"https://mintcdn.com/dripart/WCFdTagRdhtvk9-o/logo/light.svg?fit=max\u0026auto=format\u0026n=WCFdTagRdhtvk9-o\u0026q=85\u0026s=ec112de87239058f5a931a7e4b594965","dark":"https://mintcdn.com/dripart/QzWbjSCBG7w61rR3/logo/dark.svg?fit=max\u0026auto=format\u0026n=QzWbjSCBG7w61rR3\u0026q=85\u0026s=62b4d879fb3aadbd7a468d1539032d6f","href":"/"},"favicon":"https://mintcdn.com/dripart/maKDA164-rrTfyxY/favicon.ico?fit=max\u0026auto=format\u0026n=maKDA164-rrTfyxY\u0026q=85\u0026s=94f3a697cf4c9a1ee3961b69219d0942","appearance":{"default":"dark"},"navbar":{"links":[{"href":"https://blog.comfy.org/?utm_source=docs","label":"Blog"},{"href":"/tutorials/partner-nodes/pricing","label":"Pricing"},{"href":"https://platform.comfy.org/?utm_source=docs","label":"Platform"},{"href":"https://comfy.org/download?utm_source=docs","label":"Download"}],"primary":{"type":"button","label":"Comfy Cloud","href":"https://comfy.org/cloud?utm_source=docs"}},"footer":{"socials":{"github":"https://github.com/Comfy-Org/ComfyUI","x":"https://x.com/ComfyUI","discord":"https://discord.com/invite/comfyorg","youtube":"https://www.youtube.com/@comfyorg"},"links":[{"header":"Resources","items":[{"label":"installation","href":"/installation/system_requirements"},{"label":"Tutorials","href":"/tutorials/basic/text-to-image"},{"label":"Development","href":"/development/overview"}]},{"header":"Products","items":[{"label":"Features","href":"https://www.comfy.org/?utm_source=docs"},{"label":"Gallery","href":"https://www.comfy.org/gallery?utm_source=docs"},{"label":"Download","href":"https://www.comfy.org/download?utm_source=docs"}]},{"header":"Company","items":[{"label":"About","href":"https://www.comfy.org/about?utm_source=docs"},{"label":"Careers","href":"https://www.comfy.org/careers?utm_source=docs"},{"label":"Terms of Service","href":"https://www.comfy.org/terms-of-service?utm_source=docs"},{"label":"Privacy Policy","href":"https://www.comfy.org/privacy-policy?utm_source=docs"}]}]},"search":{"prompt":"Search Comfy documentation..."},"seo":{"metatags":{"googlebot":"max-video-preview:0"}},"icons":{"library":"fontawesome"},"integrations":{"ga4":{"measurementId":"G-MXC01ZDDHQ"},"posthog":{"apiKey":"phc_iKfK86id4xVYws9LybMje0h44eGtfwFgRPIBehmy8rO"}},"contextual":{"options":["copy","view","chatgpt","claude"],"display":"header"},"styling":{"latex":true},"navigation":{"languages":[{"language":"en","href":""},{"language":"zh","footer":{"socials":{"github":"https://github.com/Comfy-Org/ComfyUI","x":"https://x.com/ComfyUI","discord":"https://discord.com/invite/comfyorg","youtube":"https://www.youtube.com/@comfyorg"},"links":[{"header":"资源","items":[{"label":"安装","href":"/zh/installation/system_requirements"},{"label":"教程","href":"/zh/tutorials/basic/text-to-image"},{"label":"开发","href":"/zh/development/overview"}]},{"header":"产品","items":[{"label":"功能","href":"https://www.comfy.org/?utm_source=docs"},{"label":"画廊","href":"https://www.comfy.org/gallery?utm_source=docs"},{"label":"下载","href":"https://www.comfy.org/download?utm_source=docs"}]},{"header":"公司","items":[{"label":"关于","href":"https://www.comfy.org/about?utm_source=docs"},{"label":"招聘","href":"https://www.comfy.org/careers?utm_source=docs"},{"label":"服务条款","href":"https://www.comfy.org/terms-of-service?utm_source=docs"},{"label":"隐私政策","href":"https://www.comfy.org/privacy-policy?utm_source=docs"}]}]},"href":"zh"},{"language":"ja","footer":{"socials":{"github":"https://github.com/Comfy-Org/ComfyUI","x":"https://x.com/ComfyUI","discord":"https://discord.com/invite/comfyorg","youtube":"https://www.youtube.com/@comfyorg"},"links":[{"header":"リソース","items":[{"label":"インストール","href":"/ja/installation/system_requirements"},{"label":"チュートリアル","href":"/ja/tutorials/basic/text-to-image"},{"label":"開発","href":"/ja/development/overview"}]},{"header":"プロダクト","items":[{"label":"機能","href":"https://www.comfy.org/?utm_source=docs"},{"label":"ギャラリー","href":"https://www.comfy.org/gallery?utm_source=docs"},{"label":"ダウンロード","href":"https://www.comfy.org/download?utm_source=docs"}]},{"header":"会社情報","items":[{"label":"概要","href":"https://www.comfy.org/about?utm_source=docs"},{"label":"採用情報","href":"https://www.comfy.org/careers?utm_source=docs"},{"label":"利用規約","href":"https://www.comfy.org/terms-of-service?utm_source=docs"},{"label":"プライバシーポリシー","href":"https://www.comfy.org/privacy-policy?utm_source=docs"}]}]},"navbar":{"links":[{"href":"/ja/tutorials/partner-nodes/pricing","label":"料金"},{"href":"https://comfy.org/download?utm_source=docs","label":"ダウンロード"}],"primary":{"type":"button","label":"Comfy Cloud","href":"https://comfy.org/cloud?utm_source=docs"}},"href":"ja"},{"language":"ko","footer":{"socials":{"github":"https://github.com/Comfy-Org/ComfyUI","x":"https://x.com/ComfyUI","discord":"https://discord.com/invite/comfyorg","youtube":"https://www.youtube.com/@comfyorg"},"links":[{"header":"리소스","items":[{"label":"설치","href":"/ko/installation/system_requirements"},{"label":"튜토리얼","href":"/ko/tutorials/basic/text-to-image"},{"label":"개발","href":"/ko/development/overview"}]},{"header":"제품","items":[{"label":"기능","href":"https://www.comfy.org/?utm_source=docs"},{"label":"갤러리","href":"https://www.comfy.org/gallery?utm_source=docs"},{"label":"다운로드","href":"https://www.comfy.org/download?utm_source=docs"}]},{"header":"회사 정보","items":[{"label":"소개","href":"https://www.comfy.org/about?utm_source=docs"},{"label":"채용","href":"https://www.comfy.org/careers?utm_source=docs"},{"label":"이용약관","href":"https://www.comfy.org/terms-of-service?utm_source=docs"},{"label":"개인정보 처리방침","href":"https://www.comfy.org/privacy-policy?utm_source=docs"}]}]},"navbar":{"links":[{"href":"/ko/tutorials/partner-nodes/pricing","label":"가격 정책"},{"href":"https://comfy.org/download?utm_source=docs","label":"다운로드"}],"primary":{"type":"button","label":"Comfy Cloud","href":"https://comfy.org/cloud?utm_source=docs"}},"href":"ko"},{"language":"es","href":"es"}]}},"deployment":{"deploymentMetadataValue":{"subdomain":"dripart","hasAudioNarration":false,"actualSubdomain":"dripart","customDomains":["docs.comfy.org"],"gitSource":{"type":"github","owner":"comfy-org","repo":"docs","deployBranch":"main","contentDirectory":"","isPrivate":false,"mountPath":"","label":""},"feedback":{"thumbs":true,"edits":true,"issues":true,"agentFeedback":true},"entitlements":{"AI_CHAT":{"status":"DISABLED"},"WEB_MCP":{"status":"ENABLED"},"NARRATION":{"status":"DISABLED"}},"buildId":"6af13acd3de17d5f9fbbbbc7","clientVersion":"0.0.4088","searchFilterCounts":[{"language":"en","tag":"Built-in Nodes","count":1166},{"language":"ja","tag":"組み込みノード","count":1166},{"language":"zh","tag":"内置节点","count":1166},{"language":"en","tag":"Nodes","count":1165},{"language":"ja","tag":"ノード","count":1165},{"language":"zh","tag":"节点","count":1165},{"language":"ko","tag":"내장 노드 (Built-in Nodes)","count":1124},{"language":"ko","tag":"노드","count":1123},{"language":"es","tag":"Nodos integrados","count":1058},{"language":"es","tag":"Nodos","count":1057},{"language":"en","tag":"Tutorials","count":414},{"language":"es","tag":"Tutoriales","count":414},{"language":"en","tag":"Model","count":381},{"language":"ja","tag":"Model","count":381},{"language":"ko","tag":"Model","count":381},{"language":"zh","tag":"Model","count":381},{"language":"es","tag":"Modelo","count":378},{"language":"en","tag":"Image","count":353},{"language":"en","tag":"Partner","count":348},{"language":"ja","tag":"Partner","count":348},{"language":"ko","tag":"Partner","count":348},{"language":"zh","tag":"Partner","count":348},{"language":"es","tag":"Partner","count":346},{"language":"es","tag":"Imagen","count":323},{"language":"ja","tag":"はじめに","count":308},{"language":"ko","tag":"시작하기","count":308},{"language":"zh","tag":"开始使用","count":308},{"language":"ja","tag":"API 開発","count":295},{"language":"ko","tag":"API 개발","count":295},{"language":"zh","tag":"API 开发","count":295},{"language":"en","tag":"Video","count":289},{"language":"en","tag":"Comfy Router","count":287},{"language":"es","tag":"Comfy Router","count":267},{"language":"es","tag":"Video","count":264},{"language":"ja","tag":"Comfy Router","count":258},{"language":"ko","tag":"Comfy Router","count":258},{"language":"zh","tag":"Comfy Router","count":258},{"language":"en","tag":"Models","count":257},{"language":"en","tag":"All Models","count":254},{"language":"es","tag":"Models","count":228},{"language":"ja","tag":"Models","count":228},{"language":"ko","tag":"Models","count":228},{"language":"zh","tag":"Models","count":228},{"language":"es","tag":"All Models","count":225},{"language":"ja","tag":"画像","count":205},{"language":"ko","tag":"이미지","count":205},{"language":"zh","tag":"图像","count":205},{"language":"ja","tag":"Video","count":193},{"language":"zh","tag":"Video","count":193},{"language":"ko","tag":"Video","count":176}],"searchSettings":{"maxResults":10}},"assistantConfig":{"enableStarterQuestions":false},"basePath":"","hasChatPermissions":false,"hasWebMcpPermissions":true,"toggles":[{"name":"kill-isr","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-mintlify-slack","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-integrations-settings","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"rbac-expansion","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-pr-grouping","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-prefix","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"analytics-v7","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"user-flows-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"no-publish-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-onboarding","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"llms-txt-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving-live","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"stripTemperatureMiddleware","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"support-platform-pylon-zendesk","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"instant-rollback","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications-server","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-fable","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fixed-ai-action-pricing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automation-resolve-merge-conflict","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"scoped-publishing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"mintql","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"page-level-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-version-history-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"billing-page-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"full-page-search","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workspace-projects","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"assistant-v5","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fork-pr-previews","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"revalidation-jwt","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-sso-scim","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"hobby-abuse-scan","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"dashboard-inbox","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-signup","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-dual-write","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-enabled","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"approve-review-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-metadata","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"sso-setup-deadline-banner","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-serve","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"live-agents","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"comment-mode","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false}],"googleFontsInlined":false},"customCss":[{"filePath":"custom.css","content":":root{--ink-900: #151417;--hub-shell-light: #f7f6f9;--accent-purple: #49378b;--accent-yellow: #f2ff59;--primary: 73 55 139 !important;--primary-light: 242 255 89 !important;--primary-dark: 242 255 89 !important}html.dark{--primary: 242 255 89 !important;--background-dark: 14 14 13 !important}html.dark body{background-color:#0e0e0d!important}html.dark #navbar,html.dark #navbar-transition{background-color:var(--ink-900)!important}html.dark #sidebar,html.dark #sidebar-content{background-color:rgb(var(--background-dark))!important}html.dark #navbar,html.dark #navbar-transition{box-shadow:none!important;filter:none!important;backdrop-filter:none!important;-webkit-backdrop-filter:none!important}html.dark #navbar-transition{border-bottom:1px solid rgba(255, 255, 255, 0.08)!important;opacity:1!important}html.dark img.nav-logo{filter:none}html.dark #sidebar-content a:not([aria-current=\"page\"]){color:rgba(255, 255, 255, 0.72)!important}html.dark #sidebar-content a:not([aria-current=\"page\"]) *{color:inherit!important}html.dark #sidebar-content a[aria-current=\"page\"]{color:var(--accent-yellow)!important;background-color:rgba(242, 255, 89, 0.10)!important}html.dark #sidebar-content a[aria-current=\"page\"] *{color:inherit!important}html.dark .nav-tabs-item[data-active],html.dark mobile-nav-tabs-item[data-active]{color:var(--accent-yellow)!important}html.dark #navbar a[href*=\"comfy.org/cloud\"] span.absolute{background-color:var(--accent-yellow)!important}html.dark #navbar a[href*=\"comfy.org/cloud\"] span.text-white{color:#151417!important}html:not(.dark) #background-color,html:not(.dark) #navbar,html:not(.dark) #navbar-transition,html:not(.dark) #sidebar,html:not(.dark) #sidebar-content{background-color:var(--hub-shell-light)!important}html:not(.dark) .nav-tabs-item[data-active],html:not(.dark) mobile-nav-tabs-item[data-active],html:not(.dark) nav-dropdown-item[data-active]{background-color:transparent!important;box-shadow:none!important;color:var(--accent-purple)!important;font-weight:600!important}html:not(.dark) .nav-tabs-item[data-active] *,html:not(.dark) mobile-nav-tabs-item[data-active] *,html:not(.dark) nav-dropdown-item[data-active] *{color:inherit!important}html:not(.dark) #sidebar-content li:has(>a[aria-current=\"page\"]){background-color:transparent!important;box-shadow:none!important}html:not(.dark) #sidebar-content a[aria-current=\"page\"]{color:var(--accent-purple)!important;background-color:rgba(73, 55, 139, 0.1)!important;font-weight:600!important}html:not(.dark) #sidebar-content a[aria-current=\"page\"] *{color:inherit!important}html:not(.dark) toc-item[data-active],html:not(.dark) toc-item[data-active-deepest],html:not(.dark) toc-item[data-active] a,html:not(.dark) toc-item[data-active-deepest] a{background-color:transparent!important;color:var(--accent-purple)!important;font-weight:600!important}html:not(.dark) #header :where(h1,h2,h3,h4,h5,h6),html:not(.dark) #content-area :where(h1,h2,h3,h4,h5,h6){color:#151417!important}html:not(.dark) #navbar a[href*=\"comfy.org/cloud\"]{background-color:transparent!important;color:var(--accent-purple)!important;border-radius:0.75rem;box-shadow:inset 0 0 0 1px var(--accent-purple)!important}html:not(.dark) #navbar a[href*=\"comfy.org/cloud\"] span.absolute{background-color:transparent!important}html:not(.dark) #navbar a[href*=\"comfy.org/cloud\"] *{color:inherit!important}#sidebar .sticky.top-0.pointer-events-none.bg-linear-to-b{background-image:none!important}@media (min-width: 1024px){#navbar.is-not-custom.is-not-center+div:has(>#sidebar),.max-w-8xl.mx-auto.relative,.max-w-8xl.mx-auto{max-width:none!important;width:100%!important;margin-left:0!important;margin-right:0!important;padding-left:0!important;padding-right:0!important}#navbar [class*=\"px-12\"],#navbar [class*=\"mx-4\"]{padding-left:0!important;padding-right:1.5rem!important;margin-left:0!important;margin-right:0!important}#navbar a.select-none,#navbar .nav-logo{margin-left:1rem!important}#navbar .nav-tabs{padding-left:2rem!important}#sidebar{left:0!important;margin-left:0!important;box-shadow:none!important}#sidebar-content{margin-left:0!important;padding-left:1rem!important;box-sizing:border-box!important}#navbar,#navbar-transition{left:0!important;right:0!important;width:100%!important;max-width:none!important}#content-area{margin-left:0!important;max-width:none!important;width:100%!important;padding-left:18rem!important}#sidebar.sticky~#content-container #content-area{padding-left:2rem!important;padding-right:2rem!important}#content-container,#body-content{max-width:none!important;width:100%!important}:root{--content-width: 100%;--sidebar-width: 18rem}}@media (min-width: 1024px){nav#sidebar,#sidebar[style]{left:0!important;right:auto!important;margin-left:0!important;transform:none!important}#navbar li.navbar-link:has(a[href*=\"comfy.org/download\"]){margin-right:0!important}#navbar a[href*=\"comfy.org/download\"]{box-sizing:border-box;border:1px solid rgb(255 255 255 / 0.22);border-radius:0.75rem;padding:7px 0.875rem!important;color:#fff!important;font-size:0.875rem;line-height:1.25rem}html:not(.dark) #navbar a[href*=\"comfy.org/download\"]{border-color:rgb(0 0 0 / 0.16);color:#151417!important}#navbar a[href*=\"comfy.org/download\"]:hover{background:rgb(255 255 255 / 0.06)}html:not(.dark) #navbar a[href*=\"comfy.org/download\"]:hover{background:rgb(0 0 0 / 0.04)}#navbar li.navbar-link:has(a[href*=\"comfy.org/download\"])+.whitespace-nowrap,#navbar .flex.space-x-6>.whitespace-nowrap.hidden{margin-left:0.5rem!important}}body:has(.router-api-reference-marker) #content,body:has(.router-api-reference-marker) #header{max-width:48rem}body:has(.router-api-reference-marker) #content-area table{width:100%;table-layout:auto}body:has(.router-api-reference-marker) #content-area th,body:has(.router-api-reference-marker) #content-area td{min-width:4rem!important;overflow-wrap:anywhere}body:has(.router-api-reference-marker) #content-area table:has(th:nth-child(6)) th:nth-child(3),body:has(.router-api-reference-marker) #content-area table:has(th:nth-child(6)) td:nth-child(3){min-width:5rem!important}@media (max-width: 1535px){body:has(.router-api-reference-marker) #content-side-layout{display:none!important}}body:has(.router-provider-coverage-marker) #content,body:has(.router-provider-coverage-marker) #header{max-width:64rem}body:has(.router-provider-coverage-marker) #content-area table{width:100%;table-layout:auto}body:has(.router-provider-coverage-marker) #content-area th,body:has(.router-provider-coverage-marker) #content-area td{min-width:5rem!important;overflow-wrap:anywhere}body:has(.router-provider-coverage-marker) #content-area th:first-child,body:has(.router-provider-coverage-marker) #content-area td:first-child{min-width:12rem!important}body:has(.router-quickstart-marker) [data-component-part=\"card-content\"] [data-component-part=\"code-block-root\"][style*=\"height:190px\"],body:has(.router-quickstart-marker) [data-component-part=\"card-content\"] [data-component-part=\"code-block-root\"][style*=\"height: 190px\"]{height:86px!important}"},{"filePath":"samples-cards.css","content":".sample-card-grid{display:grid;gap:20px;grid-template-columns:repeat(2, minmax(0, 1fr));margin-top:28px}.sample-card{min-width:0;perspective:1200px}.sample-card-inner{height:565px;position:relative;transform-style:preserve-3d;transition:transform 560ms cubic-bezier(.2, .75, .3, 1)}.sample-card[data-flipped=\"true\"] .sample-card-inner{transform:rotateY(180deg)}.sample-card-face{backface-visibility:hidden;background:#fff;border:1px solid #e5e1eb;border-radius:12px;box-sizing:border-box;height:100%;inset:0;overflow:hidden;position:absolute;width:100%}.sample-card-front{display:flex;flex-direction:column}.sample-card-back{opacity:0;pointer-events:none;transform:rotateY(180deg);visibility:hidden}.sample-card[data-flipped=\"true\"] .sample-card-front{pointer-events:none;transition:visibility 0s linear 280ms;visibility:hidden}.sample-card[data-flipped=\"true\"][data-active-path=\"api\"] .sample-card-back[data-sample-path=\"api\"],.sample-card[data-flipped=\"true\"][data-active-path=\"endpoint\"] .sample-card-back[data-sample-path=\"endpoint\"]{opacity:1;pointer-events:auto;visibility:visible}.sample-card-preview{border-bottom:1px solid #e5e1eb;cursor:pointer;display:block;width:100%}.sample-card-body{display:flex;flex:1;flex-direction:column;padding:20px}.sample-card-body h2,.sample-path-body h2{color:#49378b;font-size:18px;font-weight:700;letter-spacing:-.02em;margin:0 0 8px}.sample-path-body h2{text-align:center}.sample-card-body>p{color:#5f5966;font-size:14px;line-height:1.55;margin:0;min-height:66px}.sample-card-actions{display:flex;gap:8px;margin-top:20px}.sample-card-actions button{background:#fff;border:1px solid #cfc8de;border-radius:6px;color:#49378b;cursor:pointer;flex:1;font-size:13px;font-weight:700;padding:10px 12px}.sample-card-links{border-top:1px solid #eeeaf1;display:flex;gap:8px;margin-top:16px;padding-top:12px}.sample-card-links a{color:#625b6c;font-size:12px;font-weight:650;text-decoration:none}.sample-card-links span{color:#b3adba}.sample-path-body{padding:20px}.sample-path-body>button{background:transparent;border:0;color:#625b6c;cursor:pointer;font-size:12px;font-weight:700;padding:0}.sample-path-eyebrow{color:#857a9e;font-size:10px;font-weight:700;letter-spacing:.08em;margin:19px 0 5px;text-align:center;text-transform:uppercase}.sample-path-body>p:not(.sample-path-eyebrow){color:#5f5966;font-size:12px;line-height:1.5;margin:0 0 15px}.sample-path-steps{display:grid;gap:8px}.sample-path-step{align-items:center;background:#faf9fc;border:1px solid #e5e1ea;border-radius:8px;display:flex;gap:10px;padding:10px 11px}.sample-path-number{align-items:center;background:#49378b;border-radius:999px;color:#fff;display:inline-flex;flex:0 0 21px;font-size:11px;font-weight:700;height:21px;justify-content:center}.sample-path-copy{flex:1;min-width:0}.sample-path-copy strong{color:#312c36;display:block;font-size:12px}.sample-path-copy span{color:#706a75;display:block;font-size:11px;line-height:1.35;margin-top:2px}.sample-path-step a{color:#49378b;flex:0 0 auto;font-size:11px;font-weight:700;text-decoration:none}@media (max-width: 768px){.sample-card-grid{grid-template-columns:1fr}.sample-card-inner{height:clamp(620px, 180vw, 760px)}}"}],"page":{"pagePath":"zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","slug":"/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","pageMetadata":{"title":"Submit a partner model run to the queue and return immediately.","description":"Comfy Router's queued delivery mode. The request body is the same partner-native JSON input `POST /v2/models/{provider}/{model}` accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers `201` with a handle, and the caller collects the result later through the three reads below.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml post /v2/models/{provider}/{model}/requests","href":"/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","autogeneratedByOpenApi":true},"description":{"compiledSource":"\"use strict\";\nconst {jsx: _jsx, jsxs: _jsxs} = arguments[0];\nconst {useMDXComponents: _provideComponents} = arguments[0];\nfunction _createMdxContent(props) {\n const _components = {\n code: \"code\",\n p: \"p\",\n ..._provideComponents(),\n ...props.components\n };\n return _jsxs(_components.p, {\n children: [\"Comfy Router’s queued delivery mode. The request body is the same partner-native JSON input \", _jsx(_components.code, {\n children: \"POST /v2/models/{provider}/{model}\"\n }), \" accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers \", _jsx(_components.code, {\n children: \"201\"\n }), \" with a handle, and the caller collects the result later through the three reads below.\"]\n });\n}\nfunction MDXContent(props = {}) {\n const {wrapper: MDXLayout} = {\n ..._provideComponents(),\n ...props.components\n };\n return MDXLayout ? _jsx(MDXLayout, {\n ...props,\n children: _jsx(_createMdxContent, {\n ...props\n })\n }) : _createMdxContent(props);\n}\nreturn {\n default: MDXContent\n};\n","frontmatter":{},"scope":{}},"pageType":"default","mdx":{"mdxSource":{"compiledSource":"\"use strict\";const{Fragment:_Fragment,jsx:_jsx}=arguments[0];const{useMDXComponents:_provideComponents}=arguments[0];function _createMdxContent(props){return _jsx(_Fragment,{})}function MDXContent(props={}){const{wrapper:MDXLayout}={..._provideComponents(),...props.components};return MDXLayout?_jsx(MDXLayout,{...props,children:_jsx(_createMdxContent,{...props})}):_createMdxContent(props)}return{default:MDXContent}","frontmatter":{},"scope":{"config":{},"pageMetadata":{"title":"Submit a partner model run to the queue and return immediately.","description":"Comfy Router's queued delivery mode. The request body is the same partner-native JSON input `POST /v2/models/{provider}/{model}` accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers `201` with a handle, and the caller collects the result later through the three reads below.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml post /v2/models/{provider}/{model}/requests","href":"/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","autogeneratedByOpenApi":true}}},"mdxSourceWithNoJs":null},"mdxExtracts":{"tableOfContents":[],"codeExamples":{}},"jsLinks":["/_mintlify/custom/dripart/9d6bf2b2531e904c/giscus-comments.js","/_mintlify/custom/dripart/bd0341946f3c75a6/syft.js","/_mintlify/custom/dripart/042392a43b5e681e/samples-cards.js"],"openApiReferenceData":{"operation":{"summary":"Submit a partner model run to the queue and return immediately.","description":"Comfy Router's queued delivery mode. The request body is the same partner-native JSON input `POST /v2/models/{provider}/{model}` accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers `201` with a handle, and the caller collects the result later through the three reads below.","operationId":"submitRouterModelRequest","tags":["Comfy Router"],"security":["bd4ae1ad-476c-4e86-8ef8-aaab9f744f16","a470104d-d0cd-48f6-9282-ee00a28065db"],"parameters":["896254ae-de93-4b2a-8448-9ae1e35b8140","096f06f3-4a78-446d-a082-724ba438221a","e316ab99-673a-47bd-95dd-0970a1dbaee6","16041c42-1a52-4b1f-8eed-857c668e6ecf","e4de2cb7-1adc-4ca2-9070-1a1e5d59963a","d7fc4016-1d4a-47dc-af01-95760de57a1a"],"requestBody":"82bded17-5c21-42d1-861a-db1c125bc766","responses":{"201":"32c1d86f-101c-43ed-991b-989a455bbe9b","400":"678f7e97-ceb0-4e12-b128-fd4b330323e3","401":"8073d8d1-b248-4d54-bafe-67a8ec5cc765","402":"c7a740c0-c5a9-4332-8373-31ff68bcec19","403":"85da3516-9c43-4ecd-a437-1f89bdbd44f2","404":"41339417-841b-46a8-a660-34856a64d87a","409":"31d91588-fc97-4a07-8e1e-2c0cef7fe47a","413":"b53f21a6-ca94-462d-a38f-13538e9002ca","422":"0bf4625a-4e5a-4cb3-bb85-0e9a2dfb83a5","429":"b8165d1a-bc98-464e-990d-4c1ddf0f1887","503":"23ad4c56-08da-4399-a018-9c5fdaef758f","504":"894a5ba3-6cd4-4e7a-a247-d69b8dcf48d8"},"method":"post","type":"path","servers":["719f61a2-fd93-4e3b-b02d-37aa85fb68cc"],"path":"/v2/models/{provider}/{model}/requests","baseUrlOptions":["https://api.comfy.org"],"title":"Submit a partner model run to the queue and return immediately.","codeSamples":[],"requiredOnlyExamples":false,"requestExampleType":"generated","responseExampleType":"generated"},"dependencies":{"parameters":{"896254ae-de93-4b2a-8448-9ae1e35b8140":{"name":"provider","in":"path","required":true,"description":"Lowercase provider segment of the canonical `{provider}/{model}` model ID - the partner whose model is being run.","schema":{"type":"string","description":"Lowercase provider segment of the canonical `{provider}/{model}` model ID - the partner whose model is being run.\nLowercase `provider` segment of the canonical `{provider}/{model}` model ID - the partner whose model is being addressed. The invocation route's `provider` path parameter and a catalog entry's `provider` field both reference this one schema, which is what keeps the listed IDs and the accepted IDs from drifting apart.","pattern":"^[a-z0-9]+([._-][a-z0-9]+)*$","maxLength":64,"example":"bfl","isRequired":true,"uniqueKey":"","typeLabel":"string"}},"096f06f3-4a78-446d-a082-724ba438221a":{"name":"model","in":"path","required":true,"description":"Lowercase model segment of the canonical `{provider}/{model}` model ID - the model to run within that provider.","schema":{"type":"string","description":"Lowercase model segment of the canonical `{provider}/{model}` model ID - the model to run within that provider.\nLowercase `model` segment of the canonical `{provider}/{model}` model ID - the model to run within that provider. Shared by the invocation route's `model` path parameter and a catalog entry's `model` field, for the same no-drift reason as `RouterProviderSegment`.","pattern":"^[a-z0-9]+([._-][a-z0-9]+)*$","maxLength":128,"example":"flux-2-pro","isRequired":true,"uniqueKey":"","typeLabel":"string"}},"e316ab99-673a-47bd-95dd-0970a1dbaee6":{"name":"model_provider","in":"query","required":false,"description":"Selects an alternate provider to serve this model, instead of its current default. Omitting it runs native dispatch on the model's own default provider; `default`, `comfy`, and `comfyui` are aliases for that same native behavior and name no override, because Comfy Router is never itself a serving backend. The alternate providers Router can retarget a model onto are `fal`, `wavespeed`, `runware`, and `higgsfield`; which of them a given model supports is reported by `GET /v2/models/{provider}/{model}`. When an alternate provider is selected, the native request body is translated into that provider's real schema unless `strict_mode=true`; see `strict_mode` and `fallback_provider`. Its refusals are checked in a fixed order, and an earlier one answers whether or not a later one would. A value that is not a registered provider at all is refused `400` with `error_type: invalid_input`. Then a workspace configured for direct provider calls only refuses any non-default `model_provider` with `403` and `error_type: forbidden`, and Router never runs its `fallback_provider` retry for it; a resubmit carrying the `Idempotency-Key` of a request already accepted is answered as a replay of that request rather than refused. Then a request whose body selects a multipart operation (an edit - for example gpt-image's `image` field) is refused `409`, also with `error_type: invalid_input`, whose `detail` begins \"this request's `image` selects the edit operation\" - but only when the named provider's translator for this model cannot itself serve that operation; a leg whose translator does carry the media is not refused and proceeds normally, so this is a per-leg refusal rather than a blanket one. Then a request that has already resolved a bring-your-own-key credential for the provider in the path is refused `409`, also with `error_type: invalid_input`, whose `detail` begins `this request resolved a BYOK credential` - see the `409` on this route, where that `detail` is the only thing separating this case, and the multipart case above, from the `Idempotency-Key` one. That BYOK check runs whether or not the named provider has a leg for this model. Then the named provider's own gate refuses `403` with `error_type: not_enabled` when that provider is not turned on for you, and `503` with `error_type: service_unavailable` when the gate cannot be evaluated - a flag-evaluation failure, or a missing or nil gate entry. Only past all of those is a real provider that does not serve this model refused `400` with `error_type: invalid_input`, the same answer as a value that is not a registered provider at all - both mean the `model_provider` value cannot serve this model, and that `400`'s `detail` is human-readable and not a contract, so read `GET /v2/models/{provider}/{model}` to learn which providers a model does support rather than parsing it. Then, on a Seedance 2.x model, a body carrying an `asset://` reference in any `content[]` image, video or audio url is refused `400` with `error_type: invalid_input`: those ids are BytePlus virtual-library assets no other provider can serve, so send the media itself as an http(s) URL or a `data:` URI to use `model_provider`. Past those `400`s, this workspace's partner-provider policy for the named vendor is evaluated too and can refuse `403` or `503` of its own. Neither this parameter nor `fallback_provider` is available on a BYOK request, and the two are unavailable in different ways: the credential was resolved for the provider named in the path while every alternate leg dispatches on Comfy's own key, so an explicit `model_provider` is refused with that `409`, and `fallback_provider` is inert rather than refused - no retry against an alternate provider is attempted and the first attempt's own failure is what the caller receives. The same split applies to a multipart body: only an explicit `model_provider` reaches the `409` above, and only for a leg whose translator cannot serve the operation, while the automatic on-failure retry `fallback_provider` controls is simply skipped (inert, not refused) for any multipart body. Router defines no `provider_not_available` or `validation_error` `error_type`: these conditions fold onto `invalid_input`. The `error_type` set can still grow, so treat any value you do not recognize as `internal_error` rather than switching exhaustively.","schema":{"type":"string","isRequired":false,"description":"Selects an alternate provider to serve this model, instead of its current default. Omitting it runs native dispatch on the model's own default provider; `default`, `comfy`, and `comfyui` are aliases for that same native behavior and name no override, because Comfy Router is never itself a serving backend. The alternate providers Router can retarget a model onto are `fal`, `wavespeed`, `runware`, and `higgsfield`; which of them a given model supports is reported by `GET /v2/models/{provider}/{model}`. When an alternate provider is selected, the native request body is translated into that provider's real schema unless `strict_mode=true`; see `strict_mode` and `fallback_provider`. Its refusals are checked in a fixed order, and an earlier one answers whether or not a later one would. A value that is not a registered provider at all is refused `400` with `error_type: invalid_input`. Then a workspace configured for direct provider calls only refuses any non-default `model_provider` with `403` and `error_type: forbidden`, and Router never runs its `fallback_provider` retry for it; a resubmit carrying the `Idempotency-Key` of a request already accepted is answered as a replay of that request rather than refused. Then a request whose body selects a multipart operation (an edit - for example gpt-image's `image` field) is refused `409`, also with `error_type: invalid_input`, whose `detail` begins \"this request's `image` selects the edit operation\" - but only when the named provider's translator for this model cannot itself serve that operation; a leg whose translator does carry the media is not refused and proceeds normally, so this is a per-leg refusal rather than a blanket one. Then a request that has already resolved a bring-your-own-key credential for the provider in the path is refused `409`, also with `error_type: invalid_input`, whose `detail` begins `this request resolved a BYOK credential` - see the `409` on this route, where that `detail` is the only thing separating this case, and the multipart case above, from the `Idempotency-Key` one. That BYOK check runs whether or not the named provider has a leg for this model. Then the named provider's own gate refuses `403` with `error_type: not_enabled` when that provider is not turned on for you, and `503` with `error_type: service_unavailable` when the gate cannot be evaluated - a flag-evaluation failure, or a missing or nil gate entry. Only past all of those is a real provider that does not serve this model refused `400` with `error_type: invalid_input`, the same answer as a value that is not a registered provider at all - both mean the `model_provider` value cannot serve this model, and that `400`'s `detail` is human-readable and not a contract, so read `GET /v2/models/{provider}/{model}` to learn which providers a model does support rather than parsing it. Then, on a Seedance 2.x model, a body carrying an `asset://` reference in any `content[]` image, video or audio url is refused `400` with `error_type: invalid_input`: those ids are BytePlus virtual-library assets no other provider can serve, so send the media itself as an http(s) URL or a `data:` URI to use `model_provider`. Past those `400`s, this workspace's partner-provider policy for the named vendor is evaluated too and can refuse `403` or `503` of its own. Neither this parameter nor `fallback_provider` is available on a BYOK request, and the two are unavailable in different ways: the credential was resolved for the provider named in the path while every alternate leg dispatches on Comfy's own key, so an explicit `model_provider` is refused with that `409`, and `fallback_provider` is inert rather than refused - no retry against an alternate provider is attempted and the first attempt's own failure is what the caller receives. The same split applies to a multipart body: only an explicit `model_provider` reaches the `409` above, and only for a leg whose translator cannot serve the operation, while the automatic on-failure retry `fallback_provider` controls is simply skipped (inert, not refused) for any multipart body. Router defines no `provider_not_available` or `validation_error` `error_type`: these conditions fold onto `invalid_input`. The `error_type` set can still grow, so treat any value you do not recognize as `internal_error` rather than switching exhaustively.","uniqueKey":"","typeLabel":"string"}},"16041c42-1a52-4b1f-8eed-857c668e6ecf":{"name":"strict_mode","in":"query","required":false,"description":"Only meaningful together with `model_provider`. `false` (the default): the request body must be this model's own native contract, translated to the alternate provider's real schema - any native field that cannot be expressed exactly is dropped and disclosed via the response's `X-Comfy-Router-Dropped-Params` header, never silently. `true`: the body must already be the alternate provider's own real schema, passed through unmodified in both directions - no translation, so `X-Comfy-Router-Dropped-Params` is never sent, and provider fallback is disabled for the call because a body shaped for one provider cannot be replayed against another (see `fallback_provider`).","schema":{"type":"boolean","default":false,"isRequired":false,"description":"Only meaningful together with `model_provider`. `false` (the default): the request body must be this model's own native contract, translated to the alternate provider's real schema - any native field that cannot be expressed exactly is dropped and disclosed via the response's `X-Comfy-Router-Dropped-Params` header, never silently. `true`: the body must already be the alternate provider's own real schema, passed through unmodified in both directions - no translation, so `X-Comfy-Router-Dropped-Params` is never sent, and provider fallback is disabled for the call because a body shaped for one provider cannot be replayed against another (see `fallback_provider`).","uniqueKey":"","typeLabel":"boolean"}},"e4de2cb7-1adc-4ca2-9070-1a1e5d59963a":{"name":"Idempotency-Key","in":"header","required":false,"description":"Caller-generated key that makes retrying one logical call safe. A call that reached the caller with an answer is recorded against its key for 24 hours, and a retry carrying the same key is answered from that record instead of dispatching - and charging - the provider a second time, marked `Idempotent-Replayed: true`. Keys are scoped to the workspace your credential carries, or to your user when it carries none - so the keyspace is shared by every member of a workspace rather than private to one caller. Make a key unique across the whole workspace, not just within your own client: a second member who reuses a key string is answered from the first member's record, or refused `409` if the request differs. Because the scope follows the credential and not the person, a credential that carries no workspace at all scopes to your user id instead - so retrying one logical call under a different credential can land in a different namespace, where it is dispatched and charged again. Retry with the credential you started with. A keyed request with no authenticated caller is refused `401`. The guarantee is a billing one: a key is charged at most once. It is not a promise that a key is dispatched at most once, and it does not make a lost call resumable. Some answers are recorded but not replayable for the full 24 hours, and the billing guarantee is the half that always holds: the key stays consumed - the retry never re-runs and never re-charges - but it is answered `409 invalid_input` instead of being served the original body. That happens whenever Comfy does not hold a copy of the response it can still stand behind; a response past the replay size cap and a result addressed by an asset URL Comfy does not host are the two you are most likely to meet. The second is the one worth planning for, because it looks like an ordinary success: which models answer with a Comfy-hosted asset link, how long one stays valid, and what a result carries when an individual asset could not be copied are stated in one place, under Result assets in the API reference, and this paragraph does not restate them. On a model that returns its result on the original call, an answer still holding a partner's own asset link is replayed for a few minutes - which is where a dropped connection puts an SDK's automatic same-key re-send, and while the partner's link is certainly still alive - and refused after that rather than replayed dead. So a prompt retry of a partially re-hosted result behaves exactly like any other replay, and only a later one meets the `409`. That short window is deliberately not offered on a model that submits and is polled, because there the partner may have minted the URL long before your call collected it and its remaining life is unknowable - and those models do not need it: a call cut off mid-generation keeps its key holding the generation, so the same-key retry collects the original result rather than a recorded copy of it. A response past the size cap has no window either and is refused from the start. The action on any of these `409 invalid_input` refusals is the same: use a new key. Only an answer a provider actually produced is recorded, though. A refusal Router raises on its own before dispatching anything - not enabled for you yet (`403`), unknown model (`404`), not entitled to the model (`403`), a body the model's schema rejects or that names a different model than the path (`422`), a malformed request (`400 invalid_input`) - dispatched nothing and charged nothing, so it releases the key: re-send the same key once you are on the rollout ramp or have corrected the request and it runs for real, rather than replaying the refusal or colliding with it as a `409`. That turns on whether a provider was reached, never on the status, so a `400 content_policy_violation` - the partner's own answer to a call that ran, which some models meter - is recorded and replayed like any other answer. Releasing a refusal that dispatched nothing frees nothing chargeable, so it does not weaken the at-most-once billing guarantee above.","schema":{"type":"string","minLength":1,"maxLength":255,"example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21","isRequired":false,"description":"Caller-generated key that makes retrying one logical call safe. A call that reached the caller with an answer is recorded against its key for 24 hours, and a retry carrying the same key is answered from that record instead of dispatching - and charging - the provider a second time, marked `Idempotent-Replayed: true`. Keys are scoped to the workspace your credential carries, or to your user when it carries none - so the keyspace is shared by every member of a workspace rather than private to one caller. Make a key unique across the whole workspace, not just within your own client: a second member who reuses a key string is answered from the first member's record, or refused `409` if the request differs. Because the scope follows the credential and not the person, a credential that carries no workspace at all scopes to your user id instead - so retrying one logical call under a different credential can land in a different namespace, where it is dispatched and charged again. Retry with the credential you started with. A keyed request with no authenticated caller is refused `401`. The guarantee is a billing one: a key is charged at most once. It is not a promise that a key is dispatched at most once, and it does not make a lost call resumable. Some answers are recorded but not replayable for the full 24 hours, and the billing guarantee is the half that always holds: the key stays consumed - the retry never re-runs and never re-charges - but it is answered `409 invalid_input` instead of being served the original body. That happens whenever Comfy does not hold a copy of the response it can still stand behind; a response past the replay size cap and a result addressed by an asset URL Comfy does not host are the two you are most likely to meet. The second is the one worth planning for, because it looks like an ordinary success: which models answer with a Comfy-hosted asset link, how long one stays valid, and what a result carries when an individual asset could not be copied are stated in one place, under Result assets in the API reference, and this paragraph does not restate them. On a model that returns its result on the original call, an answer still holding a partner's own asset link is replayed for a few minutes - which is where a dropped connection puts an SDK's automatic same-key re-send, and while the partner's link is certainly still alive - and refused after that rather than replayed dead. So a prompt retry of a partially re-hosted result behaves exactly like any other replay, and only a later one meets the `409`. That short window is deliberately not offered on a model that submits and is polled, because there the partner may have minted the URL long before your call collected it and its remaining life is unknowable - and those models do not need it: a call cut off mid-generation keeps its key holding the generation, so the same-key retry collects the original result rather than a recorded copy of it. A response past the size cap has no window either and is refused from the start. The action on any of these `409 invalid_input` refusals is the same: use a new key. Only an answer a provider actually produced is recorded, though. A refusal Router raises on its own before dispatching anything - not enabled for you yet (`403`), unknown model (`404`), not entitled to the model (`403`), a body the model's schema rejects or that names a different model than the path (`422`), a malformed request (`400 invalid_input`) - dispatched nothing and charged nothing, so it releases the key: re-send the same key once you are on the rollout ramp or have corrected the request and it runs for real, rather than replaying the refusal or colliding with it as a `409`. That turns on whether a provider was reached, never on the status, so a `400 content_policy_violation` - the partner's own answer to a call that ran, which some models meter - is recorded and replayed like any other answer. Releasing a refusal that dispatched nothing frees nothing chargeable, so it does not weaken the at-most-once billing guarantee above.","uniqueKey":"","typeLabel":"string"}},"d7fc4016-1d4a-47dc-af01-95760de57a1a":{"name":"reject_unknown_fields","in":"query","required":false,"description":"Opt in to refusing a top-level request-body field this model's input schema does not declare, rather than accepting it; nested fields are not checked, and nothing is refused for a model whose schema allows undeclared fields or has no authored schema, or on a queued submit sent with `strict_mode=true`.","schema":{"type":"boolean","default":false,"isRequired":false,"description":"Opt in to refusing a top-level request-body field this model's input schema does not declare, rather than accepting it; nested fields are not checked, and nothing is refused for a model whose schema allows undeclared fields or has no authored schema, or on a queued submit sent with `strict_mode=true`.","uniqueKey":"","typeLabel":"boolean"}}},"requestBody":{"required":true,"description":"The partner model's native JSON input, identical to the body the synchronous route accepts for this model, and it selects the operation and is metered the same way: the body's own fields choose which operation Router runs on a model that supports more than one (an input image switches an editable image model to image-to-image, which may be metered on its own rate; a Seedance first-frame image selects image-to-video and a reference image or clip selects reference-to-video). On native dispatch a Seedance request bills by the media kinds in `content`, not the roles: any video input bills as video-to-video, otherwise any image bills as image-to-video, otherwise text-to-video, except that a final render from a `draft_task` item bills as the operation of the Draft it renders, with some models charging the same rate for text-to-video and image-to-video; with `model_provider` selecting an alternate provider, each conditioned operation may be metered on that provider's own rate. The same provider-selection contract applies at dispatch: without `model_provider`, or with `model_provider` and `strict_mode=false` (the default), the body is the model's native document and is validated against the model's own input schema before the run is admitted, so a body the model would reject is a `422` here rather than a queued request that fails minutes later - a non-strict alternate-provider body is additionally translated into that provider's real schema at dispatch. With `strict_mode=true` the body must already be the alternate provider's own schema and is forwarded unchanged: native-schema validation is skipped, exactly as on the synchronous route (see `model_provider` and `strict_mode`).","content":{"application/json":{"schema":{"type":"object","description":"A partner model's native JSON input document, forwarded to the provider as-is. Its concrete shape is owned by the partner rather than by Comfy, so this is an open object: Router does not narrow, rename, or re-envelope the fields. It is a named component (never an inline anonymous object) because ComfyUI's spec-driven codegen needs a class to generate.","additionalProperties":true,"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{}}},"exampleType":"generated"}},"exampleType":"generated"},"responses":{"32c1d86f-101c-43ed-991b-989a455bbe9b":{"description":"Created - the run was admitted to the queue. The body is the handle: the `request_id`, `status: IN_QUEUE`, a `queue_position` snapshot, and the `status_url`, `response_url` and `cancel_url` that address the rest of this request's lifetime. It is deliberately `201` and not `202`: a queued request is a resource this call created and the three URLs address it, whereas the `202` on the result read below means \"not ready yet, ask again\" and creates nothing.","headers":{"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}},"Idempotent-Replayed":{"description":"Present and `true` when this response was served from an `Idempotency-Key`'s record rather than by running the model again. It carries the original call's status, body and content type, and it is not billed a second time - the charge settled when the original completed. The header is absent on a fresh run rather than sent as `false`, so branch on its presence.","required":false,"schema":{"type":"boolean","example":true}}},"content":{"application/json":{"schema":{"type":"object","description":"The handle returned when a run is admitted to the queue: the request's identity and state, composed with the three URLs that address the rest of its lifetime.","required":["request_id","status","status_url","response_url","cancel_url"],"properties":{"status_url":{"type":"string","format":"uri","description":"Absolute URL of this request's status read.","example":"https://api.comfy.org/v2/models/bfl/flux-pro-1.1/requests/6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21/status","isRequired":true,"uniqueKey":"status_url","typeLabel":"string\u003curi>"},"response_url":{"type":"string","format":"uri","description":"Absolute URL this request's result is collected from.","example":"https://api.comfy.org/v2/models/bfl/flux-pro-1.1/requests/6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21","isRequired":true,"uniqueKey":"response_url","typeLabel":"string\u003curi>"},"cancel_url":{"type":"string","format":"uri","description":"Absolute URL a cancellation is asked for at.","example":"https://api.comfy.org/v2/models/bfl/flux-pro-1.1/requests/6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21/cancel","isRequired":true,"uniqueKey":"cancel_url","typeLabel":"string\u003curi>"},"request_id":{"type":"string","format":"uuid","x-go-type":"string","pattern":"^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$","maxLength":36,"description":"Identifier of one queued Router request - the handle a caller polls, cancels and collects a result by.","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21","isRequired":true,"uniqueKey":"request_id","typeLabel":"string\u003cuuid>"},"status":{"type":"string","description":"The state of a queued Router request. It has exactly three values, and unlike `RouterErrorType` this one is a closed `enum`, because the two schemas are closed in opposite directions on purpose. `RouterErrorType` classifies failures and its set is expected to grow, so a generated client that hard-rejected an unrecognised bucket would fail hardest exactly when something had already gone wrong. This one is a lifecycle, and a lifecycle with a fourth state added later is a breaking change to every polling loop written against it whether it is declared as an enum or not - so it is declared as one, and the constraint is stated where a client can see it.","enum":["IN_QUEUE","IN_PROGRESS","COMPLETED"],"example":"IN_QUEUE","isRequired":true,"uniqueKey":"status","typeLabel":"enum\u003cstring>"},"queue_position":{"type":"integer","minimum":0,"description":"How many requests are ahead of this one in the queue, at the instant the response was composed. Zero means this request is at the front.","example":3,"uniqueKey":"queue_position","typeLabel":"integer"},"estimate":{"type":"object","description":"The pre-flight cost estimate for this request, present on a fresh admission when the cost estimate is enabled for the caller. It quotes the provider leg this request was pinned to (the queue has no fallback loop, so `fallback_provider` never changes the leg that runs). When no figure can be given it is still present, with `source: unknown`; the submission never fails because of the estimate. Omitted on an idempotent replay (`Idempotent-Replayed: true`), because the original quote is not stored. It is an estimate, not the final charge, and not a price lock: the run is charged at the rates in force when it is rated, and the settled charge in your workspace's usage and billing records is final.","required":["source","currency","provider","model","pricing_as_of"],"properties":{"source":{"type":"string","description":"`exact` | `estimated` | `free` | `unknown`; read any other value as `unknown`. `exact` and `estimated` both label an estimate; neither is the final charge. `free` means the rate card prices this request at zero, so `amount` is \"0\". `unknown` carries no figure.","isRequired":true,"uniqueKey":"estimate.source","typeLabel":"string"},"currency":{"type":"string","description":"Always `USD`.","isRequired":true,"uniqueKey":"estimate.currency","typeLabel":"string"},"provider":{"type":"string","description":"The provider leg this quote is for. On a queued submit it is the leg that will run.","isRequired":true,"uniqueKey":"estimate.provider","typeLabel":"string"},"model":{"type":"string","description":"A canonical Comfy Router model ID, `{provider}/{model}` - exactly the value that addresses the model on `POST /v2/models/{provider}/{model}`, so a caller can interpolate it into that path without re-deriving it from anything. Its `pattern` is `RouterProviderSegment` and `RouterModelSegment` joined by a single `/`, and `maxLength` is their sum plus that separator.","pattern":"^[a-z0-9]+([._-][a-z0-9]+)*/[a-z0-9]+([._-][a-z0-9]+)*$","maxLength":193,"example":"bfl/flux-2-pro","isRequired":true,"uniqueKey":"estimate.model","typeLabel":"string"},"pricing_as_of":{"type":"string","format":"date-time","description":"When the rate card this quote was priced from was fetched. The estimate is not a price lock: the run is charged at the rates in force when it is rated, not at this instant. An `estimated` quote taken from the vendor's published price list (a model billed the cost the vendor reports) carries the date that list was read instead. A quote whose billed quantity is predicted from a published vendor schedule and then priced from the rate card carries the older of that schedule's read date and the card's fetch time, for an `exact` answer and an `estimated` one alike (a model billed the credits its vendor reports is the `estimated` case). Whenever no rate card was read (`reason: pricing_unavailable`, `byok`, or a `not_quotable` call that cannot be priced from any card), this is when the quote was answered.","isRequired":true,"uniqueKey":"estimate.pricing_as_of","typeLabel":"string\u003cdate-time>"},"amount":{"type":"string","description":"The estimated cost in dollars as a decimal string, e.g. \"0.04\", with up to 8 decimals and no exponent. A chargeable sub-cent price is never rendered as \"0\"; only a `free` quote reads \"0\". Present only when `source` is `exact` or `free`. Not the final charge: the settled charge in your workspace's usage and billing records is.","uniqueKey":"estimate.amount","typeLabel":"string"},"min_amount":{"type":"string","description":"The low end of the estimate in dollars as a decimal string. It is an estimate, not a guaranteed floor: a call can be billed less, for example when the provider returns less than the request asked for (such as no images), when the estimate is a typical price learned from past calls, or when the price does not rise steadily with the amount requested. Present only when `source` is `estimated`.","uniqueKey":"estimate.min_amount","typeLabel":"string"},"max_amount":{"type":"string","description":"The high end of the estimate in dollars as a decimal string. It is an estimate, not a guaranteed cap: a call can be billed more, for example when the provider returns more than was asked (such as more images than requested), when the estimate is learned from past calls, or when the price does not rise steadily with the amount requested. Present only when `source` is `estimated`.","uniqueKey":"estimate.max_amount","typeLabel":"string"},"amount_cents":{"type":"number","format":"double","description":"The same figure in US cents, unrounded, for arithmetic. Present with `amount`.","uniqueKey":"estimate.amount_cents","typeLabel":"number\u003cdouble>"},"min_amount_cents":{"type":"number","format":"double","description":"`min_amount` in US cents, unrounded. Present with `min_amount`.","uniqueKey":"estimate.min_amount_cents","typeLabel":"number\u003cdouble>"},"max_amount_cents":{"type":"number","format":"double","description":"`max_amount` in US cents. Present with `max_amount`.","uniqueKey":"estimate.max_amount_cents","typeLabel":"number\u003cdouble>"},"credits":{"type":"number","format":"double","description":"`amount` in Comfy credits using the platform conversion ($1 = 211 credits), rounded to 2 decimals - the figure `X-Comfy-Credits-Used` is expected to carry for an `exact` quote. That header is a rounded post-hoc figure, not a receipt; the settled charge in your workspace's usage and billing records is final.","uniqueKey":"estimate.credits","typeLabel":"number\u003cdouble>"},"reason":{"type":"string","description":"Present only when `source` is `unknown`: `not_quotable` (Router cannot price this call before it runs - its price depends on what the provider reports back, or the body does not bound a billed quantity), `unpriced_model` (the rate card does not price this request), `byok` (queued submit only: the run uses your own provider key, so Comfy bills nothing for it), or `pricing_unavailable` (queued submit only: the rate card could not be read when the request was admitted; this is transient, and the run is still charged as usual). Read any other value as `not_quotable`.","uniqueKey":"estimate.reason","typeLabel":"string"}},"uniqueKey":"estimate","typeLabel":"object"}},"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"status_url":"https://api.comfy.org/v2/models/bfl/flux-pro-1.1/requests/6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21/status","response_url":"https://api.comfy.org/v2/models/bfl/flux-pro-1.1/requests/6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21","cancel_url":"https://api.comfy.org/v2/models/bfl/flux-pro-1.1/requests/6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21/cancel","request_id":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21","status":"IN_QUEUE","queue_position":3,"estimate":{"source":"\u003cstring>","currency":"\u003cstring>","provider":"\u003cstring>","model":"bfl/flux-2-pro","pricing_as_of":"2023-11-07T05:31:56Z","amount":"\u003cstring>","min_amount":"\u003cstring>","max_amount":"\u003cstring>","amount_cents":123,"min_amount_cents":123,"max_amount_cents":123,"credits":123,"reason":"\u003cstring>"}}}},"exampleType":"generated"}},"exampleType":"generated"},"678f7e97-ceb0-4e12-b128-fd4b330323e3":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"8073d8d1-b248-4d54-bafe-67a8ec5cc765":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"c7a740c0-c5a9-4332-8373-31ff68bcec19":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"85da3516-9c43-4ecd-a437-1f89bdbd44f2":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`. On this route `not_enabled` also answers a model whose partner answers a generation directly as bytes: such a model cannot yet be queued, so the submit refuses it and nothing is queued or charged. For that refusal it is the model and not the account that is refused: run such a model on the synchronous route, `POST /v2/models/{provider}/{model}`, instead. The same redirect is given, in `detail`, to a bring-your-own-key request whose credential resolved but that the queue cannot carry. A credential that carries no Comfy workspace is refused `not_enabled` here too, with a `detail` naming the credential, while the synchronous route accepts it. Any other `not_enabled` or `forbidden` here is refused by the synchronous route the same way, so read `detail` rather than the bucket before re-sending elsewhere.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"41339417-841b-46a8-a660-34856a64d87a":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"31d91588-fc97-4a07-8e1e-2c0cef7fe47a":{"description":"This request cannot be served as sent, and on `POST /v2/models/{provider}/{model}` three unrelated conditions answer this status. The first, which every route declaring this status can raise: the `Idempotency-Key` on this request is already held, and this request cannot be answered from its record. Two buckets share the status there and `X-Comfy-Error-Type` is what separates them, because they are acted on in opposite ways. `concurrency_limit_exceeded` means the original call for this key is still running: wait `Retry-After` seconds and re-send the same key, which collects that call's result rather than starting a second one. `invalid_input` means the key cannot serve this request at all - it was already used for a different request (the method, the path and query, or the body differ from the original), or the original completed (and, if it succeeded, was charged) and Router holds no copy of its response it can still stand behind - for example it was too large to store, or it names an asset Comfy does not host and so cannot promise still resolves, which on a direct-return model is replayed for a few minutes after the original call and refused after that - or the copy it holds is content-encoded in a way this request did not accept - and the answer for the key is always a new key, never a re-send of this one. There is no `Retry-After` on any of these, because waiting changes nothing. `detail` says which case it is; the different-request case says nothing about how the call that does own the key turned out. The second and third conditions are raised only by `POST /v2/models/{provider}/{model}`, are not about the `Idempotency-Key` at all, and are both reachable on a request that carries no key. Router checks the third before the second, so a request that would trip both is refused for the third: an explicit `model_provider` naming an alternate provider on a request whose body selects a multipart operation (an edit, for example gpt-image's `image` field), when that provider's translator for this model cannot itself serve the operation - the swap is refused rather than silently billing a plain generation for the edit the caller actually asked for. A leg whose translator does carry the media is not refused and proceeds normally, so this refusal is per-leg rather than blanket. This one is not raised by the automatic on-failure retry `fallback_provider` controls, which is simply skipped (inert, not refused) on any multipart body, whether or not a leg could have served it - see the `model_provider` parameter. Its `detail` begins \"this request's `image` selects the edit operation\". The second: `model_provider` named an alternate provider on a request that had already resolved a bring-your-own-key credential for the provider in the path. The three are mutually exclusive - the multipart case is decided from the request body and the named leg's own translator, before BYOK is even considered - and the BYOK case is exclusive with the key case because that credential was resolved for the path's provider while every alternate leg dispatches on Comfy's own key for its own provider, so the call is refused before anything is dispatched and nothing is charged. Both the second and third carry `invalid_input`, the same bucket as the terminal key case above, so `X-Comfy-Error-Type` does not separate any of the three and `detail` is what a client branches on: the BYOK case begins `this request resolved a BYOK credential`, and a new key does not help - drop `model_provider`, or send the request without the BYOK credential. See the `model_provider` parameter, which also records that `fallback_provider` is inert rather than refused on a BYOK request. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}},"Retry-After":{"description":"Seconds to wait before retrying the same request with the same `Idempotency-Key`. It is set on the two answers such a retry can actually collect from: a `409` carrying `error_type: concurrency_limit_exceeded`, where the original call for that key is still running, and a `deadline_exceeded` `504`, where Comfy stopped holding the connection but still holds a handle to a generation the provider is running. In both cases the value is the interval Router itself would wait before asking again, which is the one honest number this route has for \"ask again later\". Absent when there is nothing to collect: an unkeyed call, a bound that expired before the provider accepted anything, or a `409` that refuses the key outright instead of asking the caller to wait.","required":false,"schema":{"type":"integer","minimum":1,"example":2}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"b53f21a6-ca94-462d-a38f-13538e9002ca":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"0bf4625a-4e5a-4cb3-bb85-0e9a2dfb83a5":{"description":"The request's contents were rejected against the model's schema. The body is `RouterValidationErrorResponse`, the FastAPI `detail[]` shape, so each offending field keeps its own specific `type` and `ctx`. `X-Comfy-Error-Type` carries the coarse bucket for the whole response. A JSON request body that is not an object at all (an array, a string, a number, `null`) is refused here too, as `dict_type` at `[\"body\"]`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}},"Idempotent-Replayed":{"description":"Present and `true` when this response was served from an `Idempotency-Key`'s record rather than by running the model again. It carries the original call's status, body and content type, and it is not billed a second time - the charge settled when the original completed. The header is absent on a fresh run rather than sent as `false`, so branch on its presence.","required":false,"schema":{"type":"boolean","example":true}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's model-level `422` body, in the FastAPI form: the request was well-formed enough to reach the model and the model rejected its contents. Note it carries no `error_type` of its own - that is what `X-Comfy-Error-Type` on the response is for, so a client can read the coarse bucket off the header without first deciding which of the two Router error bodies it received.","properties":{"detail":{"type":"array","description":"Every validation failure found on the request, one entry per offending field.","items":{"type":"object","description":"One model-level validation failure, in the FastAPI form. `type` carries the specific provider reason - `value_error`, `missing`, `image_too_small`, `unsupported_audio_format`, `greater_than`, `file_too_large` and the rest - which is the granularity `RouterErrorType`'s coarse bucket cannot express. It is an open string and not an `enum` for the same reason: the provider vocabulary runs to roughly 48 values across two tiers and grows on the provider's release cycle, not ours, and an unmodelled value must reach the caller rather than fail deserialization.","properties":{"loc":{"type":"array","description":"Path to the offending field, outermost segment first - for example `[\"body\", \"image_url\"]`, or `[\"body\", \"images\", 0]` where an integer indexes into an array.","items":{"oneOf":[{"type":"string","uniqueKey":"detail.items.[INDEX].loc.items.[INDEX].oneOf.0","typeLabel":"string"},{"type":"integer","uniqueKey":"detail.items.[INDEX].loc.items.[INDEX].oneOf.1","typeLabel":"integer"}],"uniqueKey":"detail.items.[INDEX].loc.items.[INDEX]","typeLabel":"string | integer"},"isRequired":true,"uniqueKey":"detail.items.[INDEX].loc","typeLabel":"(string | integer)[]"},"msg":{"type":"string","description":"Human-readable description of this single failure.","isRequired":true,"uniqueKey":"detail.items.[INDEX].msg","typeLabel":"string"},"type":{"type":"string","description":"Specific, machine-readable reason for this failure, passed through from the provider unchanged. This is the value a typed SDK exception hierarchy branches on; `error_type` on the response header is only its coarse bucket.","example":"image_too_small","isRequired":true,"uniqueKey":"detail.items.[INDEX].type","typeLabel":"string"},"ctx":{"type":"object","description":"The violated bound for one `RouterValidationErrorDetail`, carried from the provider verbatim - for example `{\"limit_value\": 8}` alongside `greater_than`, `{\"min_width\": 512}` alongside `image_too_small`, or `{\"max_size_bytes\": 10485760}` alongside `file_too_large`. The key set is specific to the provider and the error type, so this is deliberately an open object: narrowing it to a fixed field list, or folding it into the `msg` string, is precisely how a ported integration compiles and then silently loses the branch that read the bound. Absent when the error type carries no bound.","additionalProperties":true,"uniqueKey":"detail.items.[INDEX].ctx","typeLabel":"object"},"input":{"description":"The offending input value, echoed back verbatim so a caller can see what was rejected without re-deriving it from `loc`. Any JSON type - string, number, boolean, array, object or null - so this schema is deliberately left untyped rather than narrowed to an object. Absent when the provider does not echo the input back.","uniqueKey":"detail.items.[INDEX].input","typeLabel":"any"}},"required":["loc","msg","type"],"uniqueKey":"detail.items.[INDEX]","typeLabel":"object"},"isRequired":true,"uniqueKey":"detail","typeLabel":"object[]"}},"required":["detail"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":[{"loc":["\u003cstring>"],"msg":"\u003cstring>","type":"image_too_small","ctx":{},"input":"\u003cunknown>"}]}}},"exampleType":"generated"}},"exampleType":"generated"},"b8165d1a-bc98-464e-990d-4c1ddf0f1887":{"description":"Inspect `X-Comfy-Error-Type`: `queue_backlog_full` means you already hold as many unfinished queued requests as you are allowed, so submit again once one of them finishes; `rate_limited` means wait the number of seconds in `Retry-After`. Nothing was queued or charged, and the `Idempotency-Key` is not consumed. A submit at your in-flight limit is queued rather than refused, so `concurrency_limit_exceeded` is never answered here.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}},"Retry-After":{"description":"Seconds to wait before sending another request after a `429` carrying `error_type: rate_limited`: the time until the caller's per-minute request allowance has refilled enough to admit one more request. It is sent on every `rate_limited` refusal and on no other answer, so it is absent on a `429` whose `X-Comfy-Error-Type` is `concurrency_limit_exceeded` or `queue_backlog_full`. Nothing the caller does drains it early; a request sent sooner is refused again and spends nothing, but gains nothing either.","required":false,"schema":{"type":"integer","minimum":1,"example":2}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"23ad4c56-08da-4399-a018-9c5fdaef758f":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`. A `503` that was refused for capacity - the in-flight request-body budget was full, or no slot was free to scan an oversized body - carries `Retry-After` naming when to re-send the identical request; a `503` raised because a dependency faulted does not, because none of those rails knows when it will recover.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}},"Retry-After":{"description":"Seconds to wait before re-sending the same request, unchanged. It is present only when Router refused the request body for capacity - the in-flight request-body budget was full, or no slot was free to scan an oversized body - and a capacity refusal submitted nothing and charged nothing, so re-sending the identical call once the interval has passed is the whole remedy. There is no `Idempotency-Key` to collect under and no queued request to poll for; this is the one `Retry-After` on Router that means simply \"send it again later\". It is absent on the dependency-fault `503`s that share this status - a credential rail, an idempotency store or a policy decision point that could not answer - because none of them knows when it will, and a wrong number is worse than none against a dependency that is already failing.","required":false,"schema":{"type":"integer","minimum":1,"example":4}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"},"894a5ba3-6cd4-4e7a-a247-d69b8dcf48d8":{"description":"A Router request-level failure - the request never reached the model, or failed for a reason the model itself did not report. The body is `RouterErrorResponse` and the bucket is repeated on `X-Comfy-Error-Type`.","headers":{"X-Comfy-Error-Type":{"description":"Coarse, machine-readable bucket for the failure, set by Router on every error response. It carries the same value as `RouterErrorResponse.error_type`, and on the `422` it is the only machine-readable bucket, because that body is the FastAPI `detail[]` shape and has no `error_type` field of its own. A client can therefore branch on this header alone, before deciding which of the two Router error bodies it received.","required":true,"schema":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}]}},"X-Comfy-Request-Id":{"description":"Server-generated identifier for this call, present on every Router response - success, 4xx and 5xx alike, because an error response is exactly when a user needs an id to quote in a support request. The same value is written into the call's usage/audit event, which is what lets a complaint about a charge be joined to the charge itself instead of searched for by timestamp.","required":true,"schema":{"type":"string","format":"uuid","example":"6f1a1a6e-6a53-4a5f-9d3a-2b3b0a1f9c21"}}},"content":{"application/json":{"schema":{"type":"object","description":"Router's request-level error body: what is returned when the request never reached the model, or failed for a reason the model itself did not report - auth, quota, an unknown model ID, or provider transport. A model-level validation failure has its own shape, `RouterValidationErrorResponse`, because flattening a FastAPI `detail[]` array into this `detail` string would destroy the per-field granularity an SDK branches on.","properties":{"detail":{"type":"string","description":"Human-readable description of the failure, safe to surface to an end user. Not machine-parsed - branch on `error_type` instead. For `model_not_found` on a retired model, `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and visible to the caller, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of the usual suggestion list. A successor named here is always a live catalog ID the call can be re-pointed at. A model whose sunset date is still in the future is not retired: it stays listed by `GET /v2/models` and stays runnable until that date. Like the rest of `detail`, this retirement wording is for display and carries no compatibility guarantee.","isRequired":true,"uniqueKey":"detail","typeLabel":"string"},"error_type":{"type":"string","description":"Coarse, machine-readable bucket for a Router failure, mirrored on the `X-Comfy-Error-Type` response header so a caller can branch without parsing the body. The set is closed at twenty values: the six request-level buckets `invalid_input`, `content_policy_violation`, `provider_error`, `provider_timeout`, `insufficient_credits` and `model_not_found`, plus the transport-level `unauthorized`, `forbidden`, `concurrency_limit_exceeded`, `client_disconnected`, `internal_error`, `deadline_exceeded`, `not_enabled`, `service_unavailable`, `rate_limited`, `cancelled`, `queue_timeout`, `request_not_found`, `queue_backlog_full` and `result_expired`. Closed describes the set as documented today, not a bound that holds forever: the set is expected to grow, which is why this is deliberately a plain string and not an `enum`, so a client must treat an unrecognised value as `internal_error` rather than switch exhaustively over the list above and break on the next addition.","example":"invalid_input","x-comfy-error-types":[{"value":"invalid_input","tier":"request","meaning":"The request was rejected before it reached the model - a malformed body, a malformed or expired pagination cursor, an input the model's own schema does not accept, or an `Idempotency-Key` that cannot serve this request (already used for a different request - the method, the path and query, or the body differ - or already consumed by a call whose response cannot be replayed). Sent with `409` in the key cases and with `400`/`422` in the others; the status says which, and the key cases are the ones answered by using a new key rather than by editing the request."},{"value":"content_policy_violation","tier":"request","meaning":"The provider refused the request on content-policy grounds. The refusal is deterministic: re-sending the same input will be refused again."},{"value":"provider_error","tier":"request","meaning":"The partner provider reported a failure of its own, or returned a response Router could not interpret as a result."},{"value":"provider_timeout","tier":"request","meaning":"The partner provider did not answer within its deadline. This bucket is the provider timing out and never Router's own server deadline, which is reported as `deadline_exceeded` - the two share `504` and are separated because they name different causes: this one says the partner failed, that one says Comfy stopped holding the connection."},{"value":"insufficient_credits","tier":"request","meaning":"The calling workspace does not have enough credits to run the model."},{"value":"model_not_found","tier":"request","meaning":"The `{provider}/{model}` ID names no model Router can run: an unknown provider, an unenrolled id, one the catalog has retired past its sunset date, or a catalogued ID the provider does not currently serve for Comfy. A retired id's `detail` reads `\u003cid> was retired on \u003cYYYY-MM-DD>; use \u003csuccessor>` when a successor is recorded and not withheld, or just `\u003cid> was retired on \u003cYYYY-MM-DD>` when it is not, instead of a suggestion list; the successor named for a retired id is always a live catalog ID you can re-point the call at, and a successor is dropped from `detail` either because the table records none, or because the recorded one is currently withheld behind an embargo the caller cannot see. A model whose sunset is still in the future is not withdrawn: it stays listed by `GET /v2/models` and stays runnable until the date, so a listing taken today remains the answer to what runs today. Otherwise `detail` carries up to three suggestions drawn from the models the caller is entitled to see, except for a catalogued ID the provider does not currently serve for Comfy, whose response carries no suggestions."},{"value":"unauthorized","tier":"transport","meaning":"The request carried no usable credential."},{"value":"forbidden","tier":"transport","meaning":"The credential is valid but is not entitled to this model or this operation."},{"value":"concurrency_limit_exceeded","tier":"transport","meaning":"The workspace already has as many calls in flight as it is allowed; retry once one of them finishes. It carries one further condition on the run route, on a `409` rather than the `429` above: another call is already in flight for the `Idempotency-Key` this request presented. Re-send the same key after `Retry-After` seconds to collect that call's result."},{"value":"client_disconnected","tier":"transport","meaning":"The caller closed the connection before Router could return a result. It is logged rather than delivered - there is no socket left to write it to - and it is an attribution, not a billing outcome: a provider generation that completed is billed regardless of whether the caller received the response."},{"value":"internal_error","tier":"transport","meaning":"Router itself failed. It is also the value a client should treat any unrecognized bucket as, so a later addition to the set does not break a client generated before it."},{"value":"deadline_exceeded","tier":"transport","meaning":"Comfy stopped holding the connection at its own configured bound before an answer arrived. It shares `504` with `provider_timeout` and the pair says which side ran out of time; this one is Comfy's own bound, so nothing about the request was rejected and the same request may be retried. It says nothing about the charge: a provider generation that completed is billed regardless of whether the caller received the response. Retry it with the same `Idempotency-Key`: when the provider had already accepted the generation, the retry collects that generation rather than dispatching another, and a `Retry-After` on the `504` says when to ask."},{"value":"not_enabled","tier":"transport","meaning":"Comfy Router is not switched on for this caller yet. Nothing about the request is wrong and the model exists, which is why this is not `model_not_found`; it shares `403` with `forbidden` and is not the same thing, because `forbidden` is an entitlement decision about the caller while this is a state of the rollout. It is terminal: do not retry, and do not treat it as an outage. The one exception to \"about the caller\" is the queued submit, which also answers `not_enabled` for a model whose partner answers a generation directly as bytes: that model cannot yet be queued, so it is the model and not the caller that is refused, nothing is queued or charged, and the synchronous route `POST /v2/models/{provider}/{model}` runs it instead."},{"value":"service_unavailable","tier":"transport","meaning":"A service Comfy Router depends on is temporarily unavailable and the caller did nothing wrong. Retry it with backoff: it is the one bucket here whose condition clears on its own, without the caller changing the request and without a concurrency slot freeing, which is what distinguishes it from the other retryable answers (`concurrency_limit_exceeded`, `deadline_exceeded`). It is separate from `internal_error` - which is a `500` and means Router itself failed - so a client can tell \"come back shortly\" from \"this call is not going to work\"."},{"value":"rate_limited","tier":"transport","meaning":"The caller has spent an allowance measured over a window and must wait for that window to roll. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one clears the moment one of the caller's own in-flight calls finishes, so retrying in seconds is right, whereas nothing the caller does drains this one early. `detail` names the window, and `Retry-After` the seconds to wait."},{"value":"cancelled","tier":"transport","meaning":"A queued request was withdrawn — through the cancel route, or by an operator — before it produced a result; it is terminal, and it is not by itself a statement about the charge. Cancelling stops Comfy waiting and it does not always stop the partner working, so a request cancelled while it was still `IN_QUEUE` was never dispatched and cannot be charged, whereas one cancelled after it was admitted may still be charged — a partner generation that completes is charged whether or not anyone collected it, which is why the cancel route calls the ask a request rather than a guarantee. It is not `client_disconnected`: that one says nobody is listening any more while a generation may still be running and billable, whereas this says the request itself was withdrawn. A caller polling the status read sees `200` with this in the body, because the request ended and so the read succeeded. Collecting the result of such a request answers `409` in Router's error envelope: that read also worked, and what it found is a request whose terminal state - the caller's own decision - leaves nothing to return. It is deliberately not `410`, which on that route means the result aged out of its retention window, and not a `5xx`, which would report the caller's own cancellation as a Router fault and read to a polling client as worth retrying."},{"value":"queue_timeout","tier":"transport","meaning":"A queued request waited past its queue timeout without ever being admitted. Terminal, unbilled, and it never took a concurrency slot — the job never reached a provider. Deliberately not `deadline_exceeded`, which is the synchronous route's connection bound: a `deadline_exceeded` generation may be running and billable, whereas this one provably never started. It is returned under `504`, which it shares with `provider_timeout` and `deadline_exceeded` because a status can only say that a clock ran out; which clock - the partner's, Comfy's connection bound, or the queue's admission bound - is what `error_type` carries. The request itself is terminal, so submit a new one rather than re-reading this one."},{"value":"request_not_found","tier":"transport","meaning":"The `request_id` names no request of the caller's under this model. It is the second of the two conditions the queued reads' `404` covers; the first is the `{provider}/{model}` ID resolving to no partner model, which is `model_not_found` and carries fuzzy model suggestions. It also covers the right-id / wrong-model URL the path shape refuses, and it is deliberately indistinguishable from a request in another workspace, so a probe with a guessed id learns nothing. A request that has merely aged out of its retention window is `410`, not this."},{"value":"queue_backlog_full","tier":"transport","meaning":"The caller already has too many queued requests waiting to run, so this submit was refused. It shares `429` with `concurrency_limit_exceeded` and is not the same thing: that one is the synchronous route's answer for too many calls in flight at once, whereas the queue accepts a submit at that limit and parks it, and this bucket is the separate bound on how many a caller may leave waiting so that parking cannot mean enqueuing without end. It clears as the caller's own queued requests finish, so retry once some of them complete."},{"value":"result_expired","tier":"transport","meaning":"The request existed and finished, but its result is no longer stored, so the collect has nothing to return. It is returned under `410` and is permanent for that id: re-reading will answer the same way, so do not retry it. It is deliberately not `request_not_found`, which would tell you the id was never valid and invite re-submitting a generation that has already run. Running the model again means submitting a new request. For a workspace under a zero-data-retention agreement, a queued request's result is not kept after it is delivered: it is removed shortly after the first collect, and an uncollected result is removed after a grace period once the request finishes, so store the result on your side when you first collect it."}],"isRequired":true,"uniqueKey":"error_type","typeLabel":"string"},"upstream_detail":{"type":"string","description":"A bounded, sanitized reason the model provider gave for rejecting the request, present only when `error_type` is `invalid_input` and `X-Comfy-Upstream-Status` is a provider `4xx` or `2xx` - i.e. the provider refused the request as malformed and said why. Usually that status is a `4xx`; it is a `2xx` for a provider that reports a rejected generation inside a success envelope (a BytePlus failed-task poll is HTTP `200` with the reason in its body). Absent on every other failure, including provider `5xx`, transport failures, content-policy refusals and any refusal Router raised about itself. It mirrors the `X-Comfy-Upstream-Detail` header.","uniqueKey":"upstream_detail","typeLabel":"string"},"refusal_subject":{"type":"string","description":"Which input or output a content-policy refusal was about, as a Router-level closed vocabulary: `input`, `output`, `input_text`, `input_image`, `input_video`, `input_audio`, `output_text`, `output_image`, `output_video`, `output_audio`. The bare `input` / `output` values name the side when the provider did not name a modality. Present only when `error_type` is `content_policy_violation` and the provider named the refused subject with a machine-readable code; absent otherwise. Never provider text. Named today for BytePlus, Runway, BFL, Gemini, Veo, Vertex, xAI and Wan refusals, and for the MiniMax Router's Nano Banana legs' Gemini refusals; a provider whose refusal does not say which side it was about leaves it absent. It mirrors the `X-Comfy-Refusal-Subject` header.","uniqueKey":"refusal_subject","typeLabel":"string"},"denied_reason":{"type":"string","description":"Billing's policy branch for a partner-node spend denial - `no_funds` when the billed wallet is empty, `unspecified` when the call was refused without a funds reading saying so. Present only when `error_type` is `insufficient_credits` and the deployment reports wallet facts; absent otherwise. A machine-readable code, not display text: show `detail`, branch on this.","uniqueKey":"denied_reason","typeLabel":"string"},"billed_workspace":{"type":"object","description":"The wallet a refused call would have charged, on `RouterErrorResponse.billed_workspace`. Answers \"which wallet is empty?\" - it is not necessarily the workspace the caller's UI currently has selected, and a team member's personal credential names their personal wallet here even while a funded team is open. Present only alongside `denied_reason`.","properties":{"type":{"type":"string","description":"`personal` or `team`. An open string: treat any other value as personal.","isRequired":true,"uniqueKey":"billed_workspace.type","typeLabel":"string"},"id":{"type":"string","description":"The Cloud workspace id. Absent on the legacy rail.","uniqueKey":"billed_workspace.id","typeLabel":"string"},"rail":{"type":"string","description":"`legacy` when the call bills the caller's pre-workspace Metronome customer rather than a Cloud workspace; that customer has no workspace id. Absent for a Cloud workspace.","uniqueKey":"billed_workspace.rail","typeLabel":"string"}},"required":["type"],"uniqueKey":"billed_workspace","typeLabel":"object"},"credential_kind":{"type":"string","description":"How the refused request authenticated - `personal_api_key`, `team_api_key`, `personal_session` or `team_session`. Answers \"which credential do I switch to bill the other wallet?\". It is not a permission and grants nothing. Present only alongside `denied_reason`.","uniqueKey":"credential_kind","typeLabel":"string"}},"required":["detail","error_type"],"uniqueKey":"","typeLabel":"object"},"examples":{"Example":{"title":"Example","value":{"detail":"\u003cstring>","error_type":"invalid_input","upstream_detail":"\u003cstring>","refusal_subject":"\u003cstring>","denied_reason":"\u003cstring>","billed_workspace":{"type":"\u003cstring>","id":"\u003cstring>","rail":"\u003cstring>"},"credential_kind":"\u003cstring>"}}},"exampleType":"generated"}},"exampleType":"generated"}},"security":{"bd4ae1ad-476c-4e86-8ef8-aaab9f744f16":{"BearerAuth":{"type":"http","scheme":"bearer","bearerFormat":"JWT","description":"Bearer token authentication. Normally a Firebase or Cloud JWT. A 'comfyui-' prefixed API key is also accepted in this header: the prefix classifies the value as an API key and it is validated exactly as if it had been sent in X-API-Key.","scopes":[],"schemeName":"BearerAuth"}},"a470104d-d0cd-48f6-9282-ee00a28065db":{"ApiKeyAuth":{"type":"apiKey","in":"header","name":"X-API-Key","description":"API key authentication. Send the key in the X-API-Key header; keys are prefixed with 'comfyui-' and are generated from user account settings. The same 'comfyui-' key is also accepted in Authorization: Bearer (see BearerAuth), and when both headers carry a key, X-API-Key wins.","scopes":[],"schemeName":"ApiKeyAuth"}}},"servers":{"719f61a2-fd93-4e3b-b02d-37aa85fb68cc":{"url":"https://api.comfy.org"}},"processedSecurityOptions":[{"schemes":[{"scheme":{"type":"http","scheme":"bearer","bearerFormat":"JWT","description":"Bearer token authentication. Normally a Firebase or Cloud JWT. A 'comfyui-' prefixed API key is also accepted in this header: the prefix classifies the value as an API key and it is validated exactly as if it had been sent in X-API-Key.","scopes":[],"schemeName":"BearerAuth"},"schema":{"title":"Bearer Auth","type":"string","isRequired":true,"description":"Bearer token authentication. Normally a Firebase or Cloud JWT. A 'comfyui-' prefixed API key is also accepted in this header: the prefix classifies the value as an API key and it is validated exactly as if it had been sent in X-API-Key.","format":"bearer","typeLabel":"string\u003cbearer>","deprecated":false},"schemeName":"BearerAuth","name":"Authorization"}],"title":"BearerAuth"},{"schemes":[{"scheme":{"type":"apiKey","in":"header","name":"X-API-Key","description":"API key authentication. Send the key in the X-API-Key header; keys are prefixed with 'comfyui-' and are generated from user account settings. The same 'comfyui-' key is also accepted in Authorization: Bearer (see BearerAuth), and when both headers carry a key, X-API-Key wins.","scopes":[],"schemeName":"ApiKeyAuth"},"schema":{"title":"X-API-Key","type":"string","description":"API key authentication. Send the key in the X-API-Key header; keys are prefixed with 'comfyui-' and are generated from user account settings. The same 'comfyui-' key is also accepted in Authorization: Bearer (see BearerAuth), and when both headers carry a key, X-API-Key wins.","isRequired":true,"typeLabel":"string","deprecated":false},"schemeName":"ApiKeyAuth","name":"X-API-Key"}],"title":"ApiKeyAuth"}]},"originalFileLocation":"router-openapi.yaml"},"subdomain":"dripart","siteName":"ComfyUI","title":"Submit a partner model run to the queue and return immediately. - ComfyUI","navMaps":{"firstHrefInVersion":{},"firstHrefInLanguage":{"en":{"href":"/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","matchLevel":1},"zh":{"href":"/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","matchLevel":0},"ja":{"href":"/ja/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","matchLevel":1},"ko":{"href":"/ko/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","matchLevel":1},"es":{"href":"/es/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately","matchLevel":1}}},"lastModified":"2026-11-09T03:16:53.784Z","originalFileLocation":"zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately.mdx","locale":"zh"},"headHtml":"\u003cscript data-mint-head>(function(){var d=document.documentElement,p=null;if(!p){try{p=localStorage.getItem(\"isDarkMode\")}catch(e){}if(p==='true')p='dark';else if(p==='false')p='light';if(p!=='light'\u0026\u0026p!=='dark'\u0026\u0026p!=='system')p=\"dark\"}var r=p==='system'?(matchMedia(\"(prefers-color-scheme: dark)\").matches?'dark':'light'):p;d.classList.remove(r==='dark'?'light':'dark');d.classList.add(r);d.setAttribute(\"data-theme-preference\",p)})();\u003c/script>\u003cmeta data-mint-head name=\"description\" content=\"Comfy Router\u0026#x27;s queued delivery mode. The request body is the same partner-native JSON input POST /v2/models/{provider}/{model} accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers 201 with a handle, and the caller collects the result later through the three reads below.\">\u003cmeta data-mint-head name=\"application-name\" content=\"ComfyUI\">\u003cmeta data-mint-head name=\"generator\" content=\"Mintlify\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon/android-chrome-192x192.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"apple-touch-icon\" type=\"image/png\" sizes=\"180x180\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon/apple-touch-icon.png\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon/favicon-16x16.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon/favicon-32x32.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon/favicon.ico\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon-dark/android-chrome-192x192.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon-dark/favicon-16x16.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon-dark/favicon-32x32.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon-dark/favicon.ico\" media=\"(prefers-color-scheme: dark)\">\u003cmeta data-mint-head property=\"og:title\" content=\"Submit a partner model run to the queue and return immediately. - ComfyUI\">\u003cmeta data-mint-head property=\"og:description\" content=\"Comfy Router\u0026#x27;s queued delivery mode. The request body is the same partner-native JSON input POST /v2/models/{provider}/{model} accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers 201 with a handle, and the caller collects the result later through the three reads below.\">\u003cmeta data-mint-head property=\"og:site_name\" content=\"ComfyUI\">\u003cmeta data-mint-head property=\"og:url\" content=\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003cmeta data-mint-head property=\"og:type\" content=\"website\">\u003cmeta data-mint-head property=\"og:image\" content=\"https://dripart.mintlify.site/_mintlify/api/og/v2?division=Comfy+Router\u0026amp;title=Submit+a+partner+model+run+to+the+queue+and+return+immediately.\u0026amp;description=Comfy+Router%27s+queued+delivery+mode.+The+request+body+is+the+same+partner-native+JSON+input+%60POST+%2Fv2%2Fmodels%2F%7Bprovider%7D%2F%7Bmodel%7D%60+accepts+for+this+model+-+one+bo\u0026amp;theme=a03fed56f9a178c9b893031e\u0026amp;signature=5cb27520b31cfef18f3161d29bd556c0aa549e2026ec3eccaf4e703b5018bab1\">\u003cmeta data-mint-head property=\"og:image:width\" content=\"1200\">\u003cmeta data-mint-head property=\"og:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"twitter:card\" content=\"summary_large_image\">\u003cmeta data-mint-head name=\"twitter:title\" content=\"Submit a partner model run to the queue and return immediately. - ComfyUI\">\u003cmeta data-mint-head name=\"twitter:description\" content=\"Comfy Router\u0026#x27;s queued delivery mode. The request body is the same partner-native JSON input POST /v2/models/{provider}/{model} accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers 201 with a handle, and the caller collects the result later through the three reads below.\">\u003cmeta data-mint-head name=\"twitter:image\" content=\"https://dripart.mintlify.site/_mintlify/api/og/v2?division=Comfy+Router\u0026amp;title=Submit+a+partner+model+run+to+the+queue+and+return+immediately.\u0026amp;description=Comfy+Router%27s+queued+delivery+mode.+The+request+body+is+the+same+partner-native+JSON+input+%60POST+%2Fv2%2Fmodels%2F%7Bprovider%7D%2F%7Bmodel%7D%60+accepts+for+this+model+-+one+bo\u0026amp;theme=a03fed56f9a178c9b893031e\u0026amp;signature=5cb27520b31cfef18f3161d29bd556c0aa549e2026ec3eccaf4e703b5018bab1\">\u003cmeta data-mint-head name=\"twitter:image:width\" content=\"1200\">\u003cmeta data-mint-head name=\"twitter:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"msapplication-config\" content=\"/mintlify-assets/_mintlify/favicons/dripart/lS3H5I41bE6LSXEf/_generated/favicon/browserconfig.xml\">\u003cmeta data-mint-head name=\"apple-mobile-web-app-title\" content=\"ComfyUI\">\u003cmeta data-mint-head name=\"msapplication-TileColor\" content=\"#49378B\">\u003cmeta data-mint-head name=\"googlebot\" content=\"max-video-preview:0\">\u003clink data-mint-head rel=\"canonical\" href=\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003clink data-mint-head rel=\"alternate\" type=\"application/xml\" href=\"/sitemap.xml\">\u003clink data-mint-head rel=\"alternate\" type=\"text/markdown\" href=\"/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately.md\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"zh\" href=\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"en\" href=\"https://docs.comfy.org/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"ja\" href=\"https://docs.comfy.org/ja/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"ko\" href=\"https://docs.comfy.org/ko/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"es\" href=\"https://docs.comfy.org/es/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"x-default\" href=\"https://docs.comfy.org/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\">\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https://docs.comfy.org/#organization\",\"name\":\"ComfyUI\",\"url\":\"https://docs.comfy.org\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https://mintcdn.com/dripart/WCFdTagRdhtvk9-o/logo/light.svg?fit=max\u0026auto=format\u0026n=WCFdTagRdhtvk9-o\u0026q=85\u0026s=ec112de87239058f5a931a7e4b594965\"}},{\"@type\":\"WebSite\",\"@id\":\"https://docs.comfy.org#website\",\"name\":\"ComfyUI\",\"url\":\"https://docs.comfy.org\",\"publisher\":{\"@id\":\"https://docs.comfy.org/#organization\"}},{\"@type\":\"WebPage\",\"@id\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately#webpage\",\"url\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\",\"name\":\"Submit a partner model run to the queue and return immediately.\",\"description\":\"Comfy Router's queued delivery mode. The request body is the same partner-native JSON input POST /v2/models/{provider}/{model} accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers 201 with a handle, and the caller collects the result later through the three reads below.\",\"dateModified\":\"2026-11-09T03:16:53.784Z\",\"isPartOf\":{\"@id\":\"https://docs.comfy.org#website\"},\"breadcrumb\":{\"@id\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately#breadcrumb\"}},{\"@type\":\"BreadcrumbList\",\"@id\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Comfy Router\",\"item\":\"https://docs.comfy.org/zh/development/comfy-router/quickstart\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Comfy Router API 参考文档\",\"item\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/list-the-models-comfy-router-can-run\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Comfy Router\",\"item\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/list-the-models-comfy-router-can-run\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Submit a partner model run to the queue and return immediately.\",\"item\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\"}]},{\"@type\":[\"TechArticle\",\"APIReference\"],\"@id\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately#apireference\",\"headline\":\"Submit a partner model run to the queue and return immediately.\",\"name\":\"Submit a partner model run to the queue and return immediately.\",\"description\":\"Comfy Router's queued delivery mode. The request body is the same partner-native JSON input POST /v2/models/{provider}/{model} accepts for this model - one body shape, one per-model schema, two delivery modes - but this route does not hold the connection for the result. It admits the run, answers 201 with a handle, and the caller collects the result later through the three reads below.\",\"url\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately\",\"mainEntityOfPage\":{\"@id\":\"https://docs.comfy.org/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately#webpage\"},\"dateModified\":\"2026-11-09T03:16:53.784Z\",\"publisher\":{\"@id\":\"https://docs.comfy.org/#organization\"},\"isPartOf\":{\"@id\":\"https://docs.comfy.org#website\"}}]}\u003c/script>\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@type\":\"WebSite\",\"name\":\"ComfyUI\",\"creator\":{\"@type\":\"Organization\",\"name\":\"Mintlify\",\"url\":\"https://mintlify.com\"}}\u003c/script>","siteName":"ComfyUI","nav":{"global":null,"languages":[{"language":"en","pages":[{"title":"en","href":"/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately"}]},{"language":"zh","footer":{"socials":{"github":"https://github.com/Comfy-Org/ComfyUI","x":"https://x.com/ComfyUI","discord":"https://discord.com/invite/comfyorg","youtube":"https://www.youtube.com/@comfyorg"},"links":[{"header":"资源","items":[{"label":"安装","href":"/zh/installation/system_requirements"},{"label":"教程","href":"/zh/tutorials/basic/text-to-image"},{"label":"开发","href":"/zh/development/overview"}]},{"header":"产品","items":[{"label":"功能","href":"https://www.comfy.org/?utm_source=docs"},{"label":"画廊","href":"https://www.comfy.org/gallery?utm_source=docs"},{"label":"下载","href":"https://www.comfy.org/download?utm_source=docs"}]},{"header":"公司","items":[{"label":"关于","href":"https://www.comfy.org/about?utm_source=docs"},{"label":"招聘","href":"https://www.comfy.org/careers?utm_source=docs"},{"label":"服务条款","href":"https://www.comfy.org/terms-of-service?utm_source=docs"},{"label":"隐私政策","href":"https://www.comfy.org/privacy-policy?utm_source=docs"}]}]},"tabs":[{"tab":"开始使用","pages":[{"title":"开始使用","href":"/zh"}]},{"tab":"内置节点","pages":[{"title":"内置节点","href":"/zh/built-in-nodes/overview"}]},{"tab":"API 开发","pages":[{"group":"使用 Comfy 开发","pages":[{"title":"ComfyUI 开发者指南:SDK、服务器 API 与云端","sidebarTitle":"开发者概览","href":"/zh/development/overview"},{"group":"Comfy Cloud","pages":[{"title":"v1 Cloud API 概述","sidebarTitle":"概述","href":"/zh/development/cloud/overview"},{"title":"Cloud API 参考","icon":"book-open","href":"/zh/development/cloud/api-reference"},{"title":"OpenAPI 规范","icon":"file-lines","openapi":"/openapi-cloud.yaml","href":"/zh/development/cloud/openapi"}]},{"group":"自托管服务器","pages":[{"title":"服务器概述","sidebarTitle":"服务器概览","href":"/zh/development/comfyui-server/comms_overview"},{"title":"ComfyUI Server API 示例:HTTP、WebSocket 与历史记录","sidebarTitle":"API 示例","href":"/zh/development/comfyui-server/api-examples"},{"title":"ComfyUI 服务器路由(HTTP 和 WebSocket API)","sidebarTitle":"HTTP 与 WebSocket 路由","icon":"route","href":"/zh/development/comfyui-server/comms_routes"},{"title":"ComfyUI 服务器消息(WebSocket API)","sidebarTitle":"WebSocket 消息","icon":"comment","href":"/zh/development/comfyui-server/comms_messages"},{"title":"ComfyUI 启动参数:命令行参考","sidebarTitle":"启动参数","icon":"terminal","href":"/zh/development/comfyui-server/startup-flags"},{"title":"自托管选项","sidebarTitle":"部署方式","icon":"server","href":"/zh/development/deploy/self-hosting"}]},{"title":"部署 ComfyUI","sidebarTitle":"概述","icon":"map","href":"/zh/development/deploy/overview"},{"title":"Comfy Cloud 快速开始","sidebarTitle":"快速开始","icon":"cloud","href":"/zh/development/deploy/cloud"},{"title":"Comfy API 和 Router 示例","sidebarTitle":"示例","icon":"code","mode":"wide","href":"/zh/development/examples"}]},{"group":"运行工作流","pages":[{"title":"运行工作流","sidebarTitle":"概述","icon":"play","href":"/zh/development/run-workflows/overview"},{"title":"运行你的第一个工作流","sidebarTitle":"首个工作流","href":"/zh/development/api-development/quickstart"},{"title":"Comfy SDK:ComfyUI 的 Python 与 TypeScript 客户端","sidebarTitle":"SDK","icon":"code","href":"/zh/development/api-development/sdks"},{"title":"自托管 ComfyUI 的 API 代理","sidebarTitle":"API 代理","icon":"plug","href":"/zh/development/comfyui-server/api-proxy"},{"title":"Comfy API:Serverless 部署","icon":"cloud-arrow-up","href":"/zh/development/serverless/overview"},{"title":"获取 API Key","sidebarTitle":"API 密钥","icon":"key","href":"/zh/development/api-development/getting-an-api-key"},{"title":"Comfy API v2 概览","sidebarTitle":"Overview","href":"/zh/api-reference/v2/overview"},{"group":"Comfy API v2 参考文档","pages":[{"group":"assets","pages":[{"title":"Upload an asset (single-call multipart)","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml post /api/v2/assets","href":"/zh/api-reference/v2/assets/upload-an-asset-single-call-multipart"},{"title":"Create or reuse an asset over existing bytes","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml post /api/v2/assets/from-hash","href":"/zh/api-reference/v2/assets/create-or-reuse-an-asset-over-existing-bytes"},{"title":"Existence check for a blob by blake3 hash","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml head /api/v2/assets/by-hash/{hash}","href":"/zh/api-reference/v2/assets/existence-check-for-a-blob-by-blake3-hash"},{"title":"Asset metadata","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml get /api/v2/assets/{id}","href":"/zh/api-reference/v2/assets/asset-metadata"},{"title":"Delete an asset record","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml delete /api/v2/assets/{id}","href":"/zh/api-reference/v2/assets/delete-an-asset-record"},{"title":"Asset bytes","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml get /api/v2/assets/{id}/content","href":"/zh/api-reference/v2/assets/asset-bytes"}]},{"group":"jobs","pages":[{"title":"List jobs, newest first","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml get /api/v2/jobs","href":"/zh/api-reference/v2/jobs/list-jobs-newest-first"},{"title":"Submit a workflow for execution","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml post /api/v2/jobs","href":"/zh/api-reference/v2/jobs/submit-a-workflow-for-execution"},{"title":"Job status (the polling workhorse)","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml get /api/v2/jobs/{id}","href":"/zh/api-reference/v2/jobs/job-status-the-polling-workhorse"},{"title":"The workflow behind a job — authoring version if pinned, executed graph otherwise","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml get /api/v2/jobs/{id}/workflow","href":"/zh/api-reference/v2/jobs/the-workflow-behind-a-job-—-authoring-version-if-pinned-executed-graph-otherwise"},{"title":"What the run printed","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml get /api/v2/jobs/{id}/logs","href":"/zh/api-reference/v2/jobs/what-the-run-printed"},{"title":"Live event stream (SSE)","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml get /api/v2/jobs/{id}/events","href":"/zh/api-reference/v2/jobs/live-event-stream-sse"},{"title":"Request cancellation","deprecated":null,"version":null,"openapi":"/openapi-v2.yaml post /api/v2/jobs/{id}/cancel","href":"/zh/api-reference/v2/jobs/request-cancellation"}]}]},{"title":"设计说明","sidebarTitle":"设计说明","icon":"compass","href":"/zh/development/api-development/sdks-design"},{"title":"工作流 API 格式","icon":"file-code","href":"/zh/development/api-development/workflow-api-format"},{"title":"工作流元数据:ComfyUI 输出文件中嵌入的工作流","sidebarTitle":"工作流元数据","icon":"file-code","href":"/zh/development/api-development/workflow-metadata"},{"title":"ComfyUI 账户 API 密钥集成","sidebarTitle":"API 密钥集成","icon":"puzzle-piece","href":"/zh/development/comfyui-server/api-key-integration"},{"group":"Comfy API Reference","pages":[{"title":"Comfy API 版本:v2 与已弃用的 v1 Cloud API","sidebarTitle":"概述","href":"/zh/development/comfy-api/overview"}]}]},{"group":"Comfy Router","pages":[{"title":"Comfy Router 快速入门","sidebarTitle":"快速入门","href":"/zh/development/comfy-router/quickstart"},{"title":"Comfy Router API 概览","sidebarTitle":"概览","href":"/zh/development/comfy-router/api"},{"title":"发现 Comfy Router 模型","sidebarTitle":"发现模型","href":"/zh/development/comfy-router/discover-models"},{"title":"Comfy Router 模型 schema 与结果","sidebarTitle":"Schema 与结果","href":"/zh/development/comfy-router/schemas"},{"title":"Comfy Router 请求排队","sidebarTitle":"排队的请求","href":"/zh/development/comfy-router/queue"},{"title":"Comfy Router 错误与重试","sidebarTitle":"错误与重试","href":"/zh/development/comfy-router/errors"},{"title":"Comfy Router 计费","sidebarTitle":"计费","href":"/zh/development/comfy-router/billing"},{"title":"将 Comfy Router 与 LiteLLM 配合使用","sidebarTitle":"LiteLLM","href":"/zh/development/comfy-router/litellm"},{"title":"Comfy Router 实时语音会话","sidebarTitle":"实时语音","href":"/zh/development/comfy-router/realtime"},{"title":"Comfy Router 请求头","sidebarTitle":"请求头","href":"/zh/development/comfy-router/headers"},{"title":"Comfy Router API 参考","sidebarTitle":"API 参考","href":"/zh/development/comfy-router/reference"},{"title":"Comfy Router 的能力与限制","sidebarTitle":"能力与限制","href":"/zh/development/comfy-router/limitations"},{"group":"Comfy Router API 参考文档","pages":[{"group":"Comfy Router","pages":[{"title":"List the models Comfy Router can run.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml get /v2/models","href":"/zh/api-reference/router/comfy-router/list-the-models-comfy-router-can-run"},{"title":"Read one partner model's catalog entry by canonical model ID.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml get /v2/models/{provider}/{model}","href":"/zh/api-reference/router/comfy-router/read-one-partner-models-catalog-entry-by-canonical-model-id"},{"title":"Run a partner model synchronously by canonical model ID.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml post /v2/models/{provider}/{model}","href":"/zh/api-reference/router/comfy-router/run-a-partner-model-synchronously-by-canonical-model-id"},{"title":"Price a model call before running it, without running it.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml post /v2/models/{provider}/{model}/estimate","href":"/zh/api-reference/router/comfy-router/price-a-model-call-before-running-it-without-running-it"},{"title":"Read one partner model's input and output schemas as an OpenAPI document.","description":"The per-model input and output schemas for a single Comfy Router model, served as a standalone OpenAPI document, so a caller - an SDK, a codegen tool, or an agent - can discover a model's arguments, and the shape of what it returns, without reading Comfy's prose docs. It is the discovery mechanism the SDK quickstart depends on.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml get /v2/models/{provider}/{model}/openapi.json","href":"/zh/api-reference/router/comfy-router/read-one-partner-models-input-and-output-schemas-as-an-openapi-document"},{"title":"Submit a partner model run to the queue and return immediately.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml post /v2/models/{provider}/{model}/requests","href":"/zh/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately"},{"title":"Collect the result of one submitted request.","description":"The collect endpoint. On a request that has finished successfully it returns the partner model's own native output, byte for byte what the synchronous route's `200` carries for the same model and the same input - so the two delivery modes produce one result shape and a caller can move between them without a second parser.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml get /v2/models/{provider}/{model}/requests/{request_id}","href":"/zh/api-reference/router/comfy-router/collect-the-result-of-one-submitted-request"},{"title":"Ask for one submitted request to be cancelled.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml put /v2/models/{provider}/{model}/requests/{request_id}/cancel","href":"/zh/api-reference/router/comfy-router/ask-for-one-submitted-request-to-be-cancelled"},{"title":"Read the queue state of one submitted request.","deprecated":null,"version":null,"openapi":"/router-openapi.yaml get /v2/models/{provider}/{model}/requests/{request_id}/status","href":"/zh/api-reference/router/comfy-router/read-the-queue-state-of-one-submitted-request"}]}]},{"group":"Models","pages":[{"title":"Comfy Router 模型","sidebarTitle":"所有模型","href":"/zh/development/comfy-router/models"},{"title":"Comfy Router 定价","sidebarTitle":"定价","mode":"wide","href":"/zh/development/comfy-router/pricing"},{"title":"Comfy Router 服务提供商","sidebarTitle":"服务提供商","href":"/zh/development/comfy-router/providers"},{"group":"Anthropic","pages":[{"title":"将 Claude Fable 5.1 与 Comfy Router 配合使用","sidebarTitle":"Claude Fable 5.1","href":"/zh/development/comfy-router/models/anthropic/claude-fable-5-1/code"},{"title":"将 Claude Fable 5 与 Comfy Router 配合使用","sidebarTitle":"Claude Fable 5","href":"/zh/development/comfy-router/models/anthropic/claude-fable-5/code"},{"title":"将 Claude Haiku 4.5 20251001 与 Comfy Router 配合使用","sidebarTitle":"Claude Haiku 4.5 20251001","href":"/zh/development/comfy-router/models/anthropic/claude-haiku-4-5-20251001/code"},{"title":"将 Claude Opus 4.6 与 Comfy Router 配合使用","sidebarTitle":"Claude Opus 4.6","href":"/zh/development/comfy-router/models/anthropic/claude-opus-4-6/code"},{"title":"将 Claude Opus 4.7 与 Comfy Router 配合使用","sidebarTitle":"Claude Opus 4.7","href":"/zh/development/comfy-router/models/anthropic/claude-opus-4-7/code"},{"title":"配合 Comfy Router 使用 Claude Opus 4.8","sidebarTitle":"Claude Opus 4.8","href":"/zh/development/comfy-router/models/anthropic/claude-opus-4-8/code"},{"title":"使用 Claude Opus 5.5 搭配 Comfy Router","sidebarTitle":"Claude Opus 5.5","href":"/zh/development/comfy-router/models/anthropic/claude-opus-5-5/code"},{"title":"将 Claude Opus 5 与 Comfy Router 配合使用","sidebarTitle":"Claude Opus 5","href":"/zh/development/comfy-router/models/anthropic/claude-opus-5/code"},{"title":"将 Claude Sonnet 4.5 20250929 与 Comfy Router 配合使用","sidebarTitle":"Claude Sonnet 4.5 20250929","href":"/zh/development/comfy-router/models/anthropic/claude-sonnet-4-5-20250929/code"},{"title":"使用 Comfy Router 调用 Claude Sonnet 4.6","sidebarTitle":"Claude Sonnet 4.6","href":"/zh/development/comfy-router/models/anthropic/claude-sonnet-4-6/code"},{"title":"结合 Comfy Router 使用 Claude Sonnet 5.5","sidebarTitle":"Claude Sonnet 5.5","href":"/zh/development/comfy-router/models/anthropic/claude-sonnet-5-5/code"},{"title":"将 Claude Sonnet 5 与 Comfy Router 配合使用","sidebarTitle":"Claude Sonnet 5","href":"/zh/development/comfy-router/models/anthropic/claude-sonnet-5/code"}]},{"group":"Beeble","pages":[{"title":"将 SwitchX 与 Comfy Router 配合使用","sidebarTitle":"SwitchX","href":"/zh/development/comfy-router/models/beeble/switchx/code"}]},{"group":"Black Forest Labs","pages":[{"title":"搭配 Comfy Router 使用 Erase V1","sidebarTitle":"Erase V1","href":"/zh/development/comfy-router/models/black-forest-labs/erase-v1/code"},{"title":"使用 Flux 1.1 Pro Ultra Image 与 Comfy Router","sidebarTitle":"Flux 1.1 Pro Ultra Image","href":"/zh/development/comfy-router/models/black-forest-labs/flux-1-1-pro-ultra-image/code"},{"title":"通过 Comfy Router 使用 FLUX.1 Kontext","sidebarTitle":"FLUX.1 Kontext","href":"/zh/development/comfy-router/models/black-forest-labs/flux-1-kontext/code"},{"title":"使用 Comfy Router 调用 FLUX 2 Max","sidebarTitle":"FLUX 2 Max","href":"/zh/development/comfy-router/models/black-forest-labs/flux-2-max/code"},{"title":"将 FLUX 2 Pro 与 Comfy Router 配合使用","sidebarTitle":"FLUX 2 Pro","href":"/zh/development/comfy-router/models/black-forest-labs/flux-2-pro/code"},{"title":"配合 Comfy Router 使用 FLUX 3 Image","sidebarTitle":"FLUX 3 Image","href":"/zh/development/comfy-router/models/black-forest-labs/flux-3-image/code"},{"title":"使用 Comfy Router 调用 FLUX 3 Video","sidebarTitle":"FLUX 3 Video","href":"/zh/development/comfy-router/models/black-forest-labs/flux-3-video/code"},{"title":"使用 Comfy Router 调用 FLUX Pro 1.0 Expand","sidebarTitle":"FLUX Pro 1.0 Expand","href":"/zh/development/comfy-router/models/black-forest-labs/flux-pro-1-0-expand/code"},{"title":"使用 Comfy Router 调用 FLUX Pro 1.0 Fill","sidebarTitle":"FLUX Pro 1.0 Fill","href":"/zh/development/comfy-router/models/black-forest-labs/flux-pro-1-0-fill/code"},{"title":"通过 Comfy Router 使用 FLUX Video Upscale","sidebarTitle":"FLUX Video Upscale","href":"/zh/development/comfy-router/models/black-forest-labs/flux-video-upscale/code"},{"title":"将 Video Edit V1 与 Comfy Router 配合使用","sidebarTitle":"Video Edit V1","href":"/zh/development/comfy-router/models/black-forest-labs/video-edit-v1/code"},{"title":"将 VTO V1 与 Comfy Router 搭配使用","sidebarTitle":"VTO V1","href":"/zh/development/comfy-router/models/black-forest-labs/vto-v1/code"}]},{"group":"Bria","pages":[{"title":"将 Fibo 与 Comfy Router 配合使用","sidebarTitle":"Fibo","href":"/zh/development/comfy-router/models/bria/fibo/code"},{"title":"将 Image Edit Add Object By Text 与 Comfy Router 配合使用","sidebarTitle":"Image Edit Add Object By Text","href":"/zh/development/comfy-router/models/bria/image-edit-add-object-by-text/code"},{"title":"结合 Comfy Router 使用 Image Edit Erase By Text","sidebarTitle":"Image Edit Erase By Text","href":"/zh/development/comfy-router/models/bria/image-edit-erase-by-text/code"},{"title":"配合 Comfy Router 使用 Image Edit Erase Foreground","sidebarTitle":"Image Edit Erase Foreground","href":"/zh/development/comfy-router/models/bria/image-edit-erase-foreground/code"},{"title":"在 Comfy Router 中使用 Image Edit Erase","sidebarTitle":"Image Edit Erase","href":"/zh/development/comfy-router/models/bria/image-edit-erase/code"},{"title":"通过 Comfy Router 使用 Image Edit Expand","sidebarTitle":"Image Edit Expand","href":"/zh/development/comfy-router/models/bria/image-edit-expand/code"},{"title":"将 Image Edit Gen Fill 与 Comfy Router 配合使用","sidebarTitle":"Image Edit Gen Fill","href":"/zh/development/comfy-router/models/bria/image-edit-gen-fill/code"},{"title":"搭配 Comfy Router 使用 Image Edit Increase Resolution","sidebarTitle":"Image Edit Increase Resolution","href":"/zh/development/comfy-router/models/bria/image-edit-increase-resolution/code"},{"title":"使用 Comfy Router 调用 Image Edit Product Holding","sidebarTitle":"Image Edit Product Holding","href":"/zh/development/comfy-router/models/bria/image-edit-product-holding/code"},{"title":"结合 Comfy Router 使用 Image Edit Product Virtual Tryon","sidebarTitle":"Image Edit Product Virtual Tryon","href":"/zh/development/comfy-router/models/bria/image-edit-product-virtual-tryon/code"},{"title":"将 Image Edit Relight 与 Comfy Router 配合使用","sidebarTitle":"Image Edit Relight","href":"/zh/development/comfy-router/models/bria/image-edit-relight/code"},{"title":"使用 Comfy Router 调用 Image Edit Remove Background Guided","sidebarTitle":"Image Edit Remove Background Guided","href":"/zh/development/comfy-router/models/bria/image-edit-remove-background-guided/code"},{"title":"通过 Comfy Router 使用 Image Edit Remove Background","sidebarTitle":"Image Edit Remove Background","href":"/zh/development/comfy-router/models/bria/image-edit-remove-background/code"},{"title":"使用 Comfy Router 调用 Image Edit Replace Background","sidebarTitle":"Image Edit Replace Background","href":"/zh/development/comfy-router/models/bria/image-edit-replace-background/code"},{"title":"配合 Comfy Router 使用 Image Edit Replace Object By Text","sidebarTitle":"Image Edit Replace Object By Text","href":"/zh/development/comfy-router/models/bria/image-edit-replace-object-by-text/code"},{"title":"通过 Comfy Router 使用 Image Edit Reseason","sidebarTitle":"Image Edit Reseason","href":"/zh/development/comfy-router/models/bria/image-edit-reseason/code"},{"title":"在 Comfy Router 中使用 Image Edit Restore","sidebarTitle":"Image Edit Restore","href":"/zh/development/comfy-router/models/bria/image-edit-restore/code"},{"title":"配合 Comfy Router 使用图像","sidebarTitle":"图像","href":"/zh/development/comfy-router/models/bria/image/code"},{"title":"将 Video Edit Erase 与 Comfy Router 搭配使用","sidebarTitle":"Video Edit Erase","href":"/zh/development/comfy-router/models/bria/video-edit-erase/code"},{"title":"配合 Comfy Router 使用 Video Edit Green Screen","sidebarTitle":"Video Edit Green Screen","href":"/zh/development/comfy-router/models/bria/video-edit-green-screen/code"},{"title":"使用 Comfy Router 进行视频编辑移除背景","sidebarTitle":"Video Edit Remove Background","href":"/zh/development/comfy-router/models/bria/video-edit-remove-background/code"},{"title":"使用 Comfy Router 进行视频编辑替换背景","sidebarTitle":"Video Edit Replace Background","href":"/zh/development/comfy-router/models/bria/video-edit-replace-background/code"}]},{"group":"BytePlus","pages":[{"title":"使用 Dreamina Seedance 2.0 260128 与 Comfy Router","sidebarTitle":"Dreamina Seedance 2.0 260128","href":"/zh/development/comfy-router/models/byteplus/dreamina-seedance-2-0-260128/code"},{"title":"使用 Comfy Router 调用 Dreamina Seedance 2.0 Fast 260128","sidebarTitle":"Dreamina Seedance 2.0 Fast 260128","href":"/zh/development/comfy-router/models/byteplus/dreamina-seedance-2-0-fast-260128/code"},{"title":"通过 Comfy Router 使用 Dreamina Seedance 2.0 Mini","sidebarTitle":"Dreamina Seedance 2.0 Mini","href":"/zh/development/comfy-router/models/byteplus/dreamina-seedance-2-0-mini/code"},{"title":"使用 Dreamina Seedance 2.5 260628 与 Comfy Router","sidebarTitle":"Dreamina Seedance 2.5 260628","href":"/zh/development/comfy-router/models/byteplus/dreamina-seedance-2-5-260628/code"},{"title":"将 Seed 2.0 Lite 260228 与 Comfy Router 配合使用","sidebarTitle":"Seed 2.0 Lite 260228","href":"/zh/development/comfy-router/models/byteplus/seed-2-0-lite-260228/code"},{"title":"将 Seed 2.0 Mini 260215 与 Comfy Router 配合使用","sidebarTitle":"Seed 2.0 Mini 260215","href":"/zh/development/comfy-router/models/byteplus/seed-2-0-mini-260215/code"},{"title":"将 Seed 2.0 Pro 260328 与 Comfy Router 搭配使用","sidebarTitle":"Seed 2.0 Pro 260328","href":"/zh/development/comfy-router/models/byteplus/seed-2-0-pro-260328/code"},{"title":"将 Seed Audio 1.0 Multilingual 与 Comfy Router 配合使用","sidebarTitle":"Seed Audio 1.0 Multilingual","href":"/zh/development/comfy-router/models/byteplus/seed-audio-1-0-multilingual/code"},{"title":"结合 Comfy Router 使用 Seed Audio 1.0","sidebarTitle":"Seed Audio 1.0","href":"/zh/development/comfy-router/models/byteplus/seed-audio-1-0/code"},{"title":"将 Seedance 1.0 Pro 250528 与 Comfy Router 配合使用","sidebarTitle":"Seedance 1.0 Pro 250528","href":"/zh/development/comfy-router/models/byteplus/seedance-1-0-pro-250528/code"},{"title":"使用 Comfy Router 调用 Seedance 1.0 Pro Fast 251015","sidebarTitle":"Seedance 1.0 Pro Fast 251015","href":"/zh/development/comfy-router/models/byteplus/seedance-1-0-pro-fast-251015/code"},{"title":"通过 Comfy Router 使用 Seedance 1.5 Pro 251215","sidebarTitle":"Seedance 1.5 Pro 251215","href":"/zh/development/comfy-router/models/byteplus/seedance-1-5-pro-251215/code"},{"title":"将 Seedream 4.0 250828 与 Comfy Router 配合使用","sidebarTitle":"Seedream 4.0 250828","href":"/zh/development/comfy-router/models/byteplus/seedream-4-0-250828/code"},{"title":"将 Seedream 4.5 251128 与 Comfy Router 配合使用","sidebarTitle":"Seedream 4.5 251128","href":"/zh/development/comfy-router/models/byteplus/seedream-4-5-251128/code"},{"title":"结合 Comfy Router 使用 Seedream 5.0 260128","sidebarTitle":"Seedream 5.0 260128","href":"/zh/development/comfy-router/models/byteplus/seedream-5-0-260128/code"},{"title":"将 Seedream 5.0 Flash 260915 与 Comfy Router 配合使用","sidebarTitle":"Seedream 5.0 Flash 260915","href":"/zh/development/comfy-router/models/byteplus/seedream-5-0-flash-260915/code"},{"title":"使用 Comfy Router 调用 Seedream 5.0 Pro 260628","sidebarTitle":"Seedream 5.0 Pro 260628","href":"/zh/development/comfy-router/models/byteplus/seedream-5-0-pro-260628/code"}]},{"group":"Elevenlabs","pages":[{"title":"使用 Comfy Router 调用 Eleven Multilingual V2","sidebarTitle":"Eleven Multilingual V2","href":"/zh/development/comfy-router/models/elevenlabs/eleven-multilingual-v2/code"},{"title":"将 Eleven Sfx V2 与 Comfy Router 配合使用","sidebarTitle":"Eleven Sfx V2","href":"/zh/development/comfy-router/models/elevenlabs/eleven-sfx-v2/code"},{"title":"将 Eleven V3 与 Comfy Router 配合使用","sidebarTitle":"Eleven V3","href":"/zh/development/comfy-router/models/elevenlabs/eleven-v3/code"},{"title":"将 Eleven V4 Turbo 与 Comfy Router 搭配使用","sidebarTitle":"Eleven V4 Turbo","href":"/zh/development/comfy-router/models/elevenlabs/eleven-v4-turbo/code"},{"title":"通过 Comfy Router 使用 Eleven V4","sidebarTitle":"Eleven V4","href":"/zh/development/comfy-router/models/elevenlabs/eleven-v4/code"}]},{"group":"fal","pages":[{"title":"使用 Comfy Router 调用 Crystal Upscaler","sidebarTitle":"Crystal Upscaler","href":"/zh/development/comfy-router/models/fal/crystal-upscaler/code"},{"title":"将 Crystal Video Upscaler 与 Comfy Router 配合使用","sidebarTitle":"Crystal Video Upscaler","href":"/zh/development/comfy-router/models/fal/crystal-video-upscaler/code"},{"title":"通过 Comfy Router 使用 FLUX 3 Max","sidebarTitle":"FLUX 3 Max","href":"/zh/development/comfy-router/models/fal/flux-3-max/code"},{"title":"将 H3 Max Turbo 与 Comfy Router 搭配使用","sidebarTitle":"H3 Max Turbo","href":"/zh/development/comfy-router/models/fal/h3-max-turbo/code"},{"title":"在 Comfy Router 中使用 H3 Max","sidebarTitle":"H3 Max","href":"/zh/development/comfy-router/models/fal/h3-max/code"},{"title":"将 Patina 与 Comfy Router 配合使用","sidebarTitle":"Patina","href":"/zh/development/comfy-router/models/fal/patina/code"}]},{"group":"Freepik","pages":[{"title":"将 AI Image Upscaler Precision V2 与 Comfy Router 配合使用","sidebarTitle":"AI Image Upscaler Precision V2","href":"/zh/development/comfy-router/models/freepik/ai-image-upscaler-precision-v2/code"},{"title":"将 AI Skin Enhancer Creative 与 Comfy Router 配合使用","sidebarTitle":"AI Skin Enhancer Creative","href":"/zh/development/comfy-router/models/freepik/ai-skin-enhancer-creative/code"},{"title":"将 AI Skin Enhancer Faithful 与 Comfy Router 配合使用","sidebarTitle":"AI Skin Enhancer Faithful","href":"/zh/development/comfy-router/models/freepik/ai-skin-enhancer-faithful/code"},{"title":"搭配 Comfy Router 使用 AI Skin Enhancer Flexible","sidebarTitle":"AI Skin Enhancer Flexible","href":"/zh/development/comfy-router/models/freepik/ai-skin-enhancer-flexible/code"}]},{"group":"Gemini Interactions","pages":[{"title":"搭配 Comfy Router 使用 Gemini Omni 1.1 Flash","sidebarTitle":"Gemini Omni 1.1 Flash","href":"/zh/development/comfy-router/models/gemini-interactions/gemini-omni-1-1-flash/code"},{"title":"使用 Comfy Router 调用 Gemini Omni Flash Preview","sidebarTitle":"Gemini Omni Flash Preview","href":"/zh/development/comfy-router/models/gemini-interactions/gemini-omni-flash-preview/code"}]},{"group":"Google","pages":[{"title":"使用 Gemini 2.5 Flash Image 与 Comfy Router","sidebarTitle":"Gemini 2.5 Flash Image","href":"/zh/development/comfy-router/models/google/gemini-2-5-flash-image/code"},{"title":"使用 Gemini 3.1 Flash Lite 与 Comfy Router","sidebarTitle":"Gemini 3.1 Flash Lite","href":"/zh/development/comfy-router/models/google/gemini-3-1-flash-lite/code"},{"title":"使用 Gemini 3.7 Flash 搭配 Comfy Router","sidebarTitle":"Gemini 3.7 Flash","href":"/zh/development/comfy-router/models/google/gemini-3-7-flash/code"},{"title":"搭配 Comfy Router 使用 Gemini 3.8 Flash","sidebarTitle":"Gemini 3.8 Flash","href":"/zh/development/comfy-router/models/google/gemini-3-8-flash/code"},{"title":"将 Gemini Nano Banana 2.1 与 Comfy Router 配合使用","sidebarTitle":"Gemini Nano Banana 2.1","href":"/zh/development/comfy-router/models/google/gemini-nano-banana-2-1/code"},{"title":"通过 Comfy Router 使用 Google Gemini","sidebarTitle":"Google Gemini","href":"/zh/development/comfy-router/models/google/gemini/code"},{"title":"将 Nano Banana 2 Lite 与 Comfy Router 配合使用","sidebarTitle":"Nano Banana 2 Lite","href":"/zh/development/comfy-router/models/google/nano-banana-2-lite/code"},{"title":"将 Nano Banana 2 与 Comfy Router 配合使用","sidebarTitle":"Nano Banana 2","href":"/zh/development/comfy-router/models/google/nano-banana-2/code"},{"title":"搭配 Comfy Router 使用 Nano Banana Pro","sidebarTitle":"Nano Banana Pro","href":"/zh/development/comfy-router/models/google/nano-banana-pro/code"}]},{"group":"HeyGen","pages":[{"title":"将 Starfish 与 Comfy Router 配合使用","sidebarTitle":"Starfish","href":"/zh/development/comfy-router/models/heygen/starfish/code"}]},{"group":"Higgsfield","pages":[{"title":"Higgsfield Genjutsu Motion Transfer V1.0:通过 Comfy Router 调用","sidebarTitle":"Higgsfield Genjutsu Motion Transfer V1.0","href":"/zh/development/comfy-router/models/higgsfield/higgsfield-genjutsu-motion-transfer-v1-0/code"},{"title":"将 Higgsfield Kling 3.4k 与 Comfy Router 搭配使用","sidebarTitle":"Higgsfield Kling 3.4k","href":"/zh/development/comfy-router/models/higgsfield/higgsfield-kling-3-4k/code"},{"title":"将 Higgsfield Kling 3 Pro 与 Comfy Router 配合使用","sidebarTitle":"Higgsfield Kling 3 Pro","href":"/zh/development/comfy-router/models/higgsfield/higgsfield-kling-3-pro/code"}]},{"group":"Ideogram","pages":[{"title":"将 Ideogram 4.5 与 Comfy Router 配合使用","sidebarTitle":"Ideogram 4.5","href":"/zh/development/comfy-router/models/ideogram/ideogram-4-5/code"},{"title":"将 Ideogram V3 与 Comfy Router 配合使用","sidebarTitle":"Ideogram V3","href":"/zh/development/comfy-router/models/ideogram/ideogram-v3/code"},{"title":"结合 Comfy Router 使用 Ideogram 4.0","sidebarTitle":"Ideogram 4.0","href":"/zh/development/comfy-router/models/ideogram/ideogram-v4/code"},{"title":"配合 Comfy Router 使用 P Image Ideogram","sidebarTitle":"P Image Ideogram","href":"/zh/development/comfy-router/models/ideogram/p-image-ideogram/code"}]},{"group":"Kling","pages":[{"title":"通过 Comfy Router 使用 Kling 3.0 Turbo","sidebarTitle":"Kling 3.0 Turbo","href":"/zh/development/comfy-router/models/kling/kling-3-0-turbo/code"},{"title":"使用 Comfy Router 调用 Kling Image O1","sidebarTitle":"Kling Image O1","href":"/zh/development/comfy-router/models/kling/kling-image-o1/code"},{"title":"将 Kling V2.5 Turbo 与 Comfy Router 搭配使用","sidebarTitle":"Kling V2.5 Turbo","href":"/zh/development/comfy-router/models/kling/kling-v2-5-turbo/code"},{"title":"通过 Comfy Router 使用 Kling V2.6","sidebarTitle":"Kling V2.6","href":"/zh/development/comfy-router/models/kling/kling-v2-6/code"},{"title":"通过 Comfy Router 使用 Kling V3 Omni","sidebarTitle":"Kling V3 Omni","href":"/zh/development/comfy-router/models/kling/kling-v3-omni/code"},{"title":"通过 Comfy Router 使用 Kling V3","sidebarTitle":"Kling V3","href":"/zh/development/comfy-router/models/kling/kling-v3/code"},{"title":"将 Kling Video O1 与 Comfy Router 配合使用","sidebarTitle":"Kling Video O1","href":"/zh/development/comfy-router/models/kling/kling-video-o1/code"},{"title":"配合 Comfy Router 使用 Videos Avatar Image 2video","sidebarTitle":"Videos Avatar Image 2video","href":"/zh/development/comfy-router/models/kling/videos-avatar-image2video/code"},{"title":"通过 Comfy Router 使用视频唇形同步","sidebarTitle":"视频唇形同步","href":"/zh/development/comfy-router/models/kling/videos-lip-sync/code"},{"title":"使用 Videos Video Extend 搭配 Comfy Router","sidebarTitle":"Videos Video Extend","href":"/zh/development/comfy-router/models/kling/videos-video-extend/code"}]},{"group":"Krea","pages":[{"title":"使用 Comfy Router 调用 Krea 2 Large","sidebarTitle":"Krea 2 Large","href":"/zh/development/comfy-router/models/krea/krea-2-large/code"},{"title":"将 Krea 2 Medium Turbo 与 Comfy Router 搭配使用","sidebarTitle":"Krea 2 Medium Turbo","href":"/zh/development/comfy-router/models/krea/krea-2-medium-turbo/code"},{"title":"配合 Comfy Router 使用 Krea 2 Medium","sidebarTitle":"Krea 2 Medium","href":"/zh/development/comfy-router/models/krea/krea-2-medium/code"},{"title":"在 Comfy Router 中使用 Krea 2","sidebarTitle":"Krea 2","href":"/zh/development/comfy-router/models/krea/krea-2/code"},{"title":"通过 Comfy Router 使用 Krea 3","sidebarTitle":"Krea 3","href":"/zh/development/comfy-router/models/krea/krea-3/code"}]},{"group":"LTX","pages":[{"title":"通过 Comfy Router 使用 LTX 2.5 Fast","sidebarTitle":"LTX 2.5 Fast","href":"/zh/development/comfy-router/models/ltx/ltx-2-5-fast/code"},{"title":"使用 Comfy Router 调用 LTX 2.5 Pro","sidebarTitle":"LTX 2.5 Pro","href":"/zh/development/comfy-router/models/ltx/ltx-2-5-pro/code"}]},{"group":"Luma","pages":[{"title":"将 Photon 1 与 Comfy Router 配合使用","sidebarTitle":"Photon 1","href":"/zh/development/comfy-router/models/luma/photon-1/code"},{"title":"将 Photon Flash 1 与 Comfy Router 配合使用","sidebarTitle":"Photon Flash 1","href":"/zh/development/comfy-router/models/luma/photon-flash-1/code"}]},{"group":"Luma 2","pages":[{"title":"搭配 Comfy Router 使用 Ray 3.2","sidebarTitle":"Ray 3.2","href":"/zh/development/comfy-router/models/luma_2/ray-3-2/code"},{"title":"搭配 Comfy Router 使用 Uni 1 Max","sidebarTitle":"Uni 1 Max","href":"/zh/development/comfy-router/models/luma_2/uni-1-max/code"},{"title":"将 Uni 1 与 Comfy Router 配合使用","sidebarTitle":"Uni 1","href":"/zh/development/comfy-router/models/luma_2/uni-1/code"}]},{"group":"Meshy","pages":[{"title":"将 Animations 与 Comfy Router 配合使用","sidebarTitle":"Animations","href":"/zh/development/comfy-router/models/meshy/animations/code"},{"title":"搭配 Comfy Router 使用 Meshy 6","sidebarTitle":"Meshy 6","href":"/zh/development/comfy-router/models/meshy/meshy-6/code"},{"title":"将 Meshy 7.1 与 Comfy Router 配合使用","sidebarTitle":"Meshy 7.1","href":"/zh/development/comfy-router/models/meshy/meshy-7-1/code"},{"title":"将 Meshy 7 与 Comfy Router 配合使用","sidebarTitle":"Meshy 7","href":"/zh/development/comfy-router/models/meshy/meshy-7/code"},{"title":"将 Remesh 与 Comfy Router 配合使用","sidebarTitle":"Remesh","href":"/zh/development/comfy-router/models/meshy/remesh/code"},{"title":"通过 Comfy Router 使用 Rigging","sidebarTitle":"Rigging","href":"/zh/development/comfy-router/models/meshy/rigging/code"}]},{"group":"MiniMax","pages":[{"title":"配合 Comfy Router 使用 MiniMax H3","sidebarTitle":"MiniMax H3","href":"/zh/development/comfy-router/models/minimax/minimax-h3/code"}]},{"group":"Moonvalley","pages":[{"title":"使用 Comfy Router 进行图生视频","sidebarTitle":"图生视频","href":"/zh/development/comfy-router/models/moonvalley/image-to-video/code"},{"title":"使用 Comfy Router 进行文生视频","sidebarTitle":"文生视频","href":"/zh/development/comfy-router/models/moonvalley/text-to-video/code"},{"title":"通过 Comfy Router 使用视频转视频","sidebarTitle":"视频转视频","href":"/zh/development/comfy-router/models/moonvalley/video-to-video/code"}]},{"group":"OpenAI","pages":[{"title":"将 GPT 4.1 Mini 与 Comfy Router 配合使用","sidebarTitle":"GPT 4.1 Mini","href":"/zh/development/comfy-router/models/openai/gpt-4-1-mini/code"},{"title":"将 GPT 4.1 与 Comfy Router 配合使用","sidebarTitle":"GPT 4.1","href":"/zh/development/comfy-router/models/openai/gpt-4-1/code"},{"title":"将 GPT 4o 与 Comfy Router 配合使用","sidebarTitle":"GPT 4o","href":"/zh/development/comfy-router/models/openai/gpt-4o/code"},{"title":"使用 GPT 5.5 Pro 搭配 Comfy Router","sidebarTitle":"GPT 5.5 Pro","href":"/zh/development/comfy-router/models/openai/gpt-5-5-pro/code"},{"title":"将 GPT 5.5 与 Comfy Router 配合使用","sidebarTitle":"GPT 5.5","href":"/zh/development/comfy-router/models/openai/gpt-5-5/code"},{"title":"将 GPT 5.6 Luna 与 Comfy Router 配合使用","sidebarTitle":"GPT 5.6 Luna","href":"/zh/development/comfy-router/models/openai/gpt-5-6-luna/code"},{"title":"通过 Comfy Router 使用 GPT 5.6 Sol","sidebarTitle":"GPT 5.6 Sol","href":"/zh/development/comfy-router/models/openai/gpt-5-6-sol/code"},{"title":"将 GPT 5.6 Terra 与 Comfy Router 配合使用","sidebarTitle":"GPT 5.6 Terra","href":"/zh/development/comfy-router/models/openai/gpt-5-6-terra/code"},{"title":"在 Comfy Router 中使用 GPT 5 Mini","sidebarTitle":"GPT 5 Mini","href":"/zh/development/comfy-router/models/openai/gpt-5-mini/code"},{"title":"将 GPT 5 Nano 与 Comfy Router 结合使用","sidebarTitle":"GPT 5 Nano","href":"/zh/development/comfy-router/models/openai/gpt-5-nano/code"},{"title":"将 GPT 5 与 Comfy Router 搭配使用","sidebarTitle":"GPT 5","href":"/zh/development/comfy-router/models/openai/gpt-5/code"},{"title":"使用 GPT 6.1 Sol 与 Comfy Router","sidebarTitle":"GPT 6.1 Sol","href":"/zh/development/comfy-router/models/openai/gpt-6-1-sol/code"},{"title":"使用 GPT 6.1 Terra 搭配 Comfy Router","sidebarTitle":"GPT 6.1 Terra","href":"/zh/development/comfy-router/models/openai/gpt-6-1-terra/code"},{"title":"将 GPT 6 Astra 与 Comfy Router 配合使用","sidebarTitle":"GPT 6 Astra","href":"/zh/development/comfy-router/models/openai/gpt-6-astra/code"},{"title":"将 GPT 6 Luna 与 Comfy Router 配合使用","sidebarTitle":"GPT 6 Luna","href":"/zh/development/comfy-router/models/openai/gpt-6-luna/code"},{"title":"将 GPT 6 Sol 与 Comfy Router 配合使用","sidebarTitle":"GPT 6 Sol","href":"/zh/development/comfy-router/models/openai/gpt-6-sol/code"},{"title":"将 GPT Image 1.5 与 Comfy Router 配合使用","sidebarTitle":"GPT Image 1.5","href":"/zh/development/comfy-router/models/openai/gpt-image-1-5/code"},{"title":"将 GPT Image 2.5 Flare 与 Comfy Router 搭配使用","sidebarTitle":"GPT Image 2.5 Flare","href":"/zh/development/comfy-router/models/openai/gpt-image-2-5-flare/code"},{"title":"通过 Comfy Router 使用 GPT Image 2.5 Sunburst","sidebarTitle":"GPT Image 2.5 Sunburst","href":"/zh/development/comfy-router/models/openai/gpt-image-2-5-sunburst/code"},{"title":"将 GPT Image 2 与 Comfy Router 配合使用","sidebarTitle":"GPT Image 2","href":"/zh/development/comfy-router/models/openai/gpt-image-2/code"},{"title":"将 o3 与 Comfy Router 配合使用","sidebarTitle":"o3","href":"/zh/development/comfy-router/models/openai/o3/code"}]},{"group":"Pika","pages":[{"title":"使用 Pika 2.5 图生视频与 Comfy Router","sidebarTitle":"Pika 2.5 图生视频","href":"/zh/development/comfy-router/models/pika/pika-2-5-image-to-video/code"},{"title":"使用 Comfy Router 调用 Pika Soundtrack","sidebarTitle":"Pika Soundtrack","href":"/zh/development/comfy-router/models/pika/pika-soundtrack/code"},{"title":"通过 Comfy Router 使用 Pika Sfx","sidebarTitle":"Pika Sfx","href":"/zh/development/comfy-router/models/pika/pika-sfx/code"},{"title":"通过 Comfy Router 使用 Pika Music","sidebarTitle":"Pika Music","href":"/zh/development/comfy-router/models/pika/pika-music/code"},{"title":"使用 Pika 2.5 文生视频与 Comfy Router","sidebarTitle":"Pika 2.5 文生视频","href":"/zh/development/comfy-router/models/pika/pika-2-5-text-to-video/code"}]},{"group":"Pruna","pages":[{"title":"结合 Comfy Router 使用 P Video 2","sidebarTitle":"P Video 2","href":"/zh/development/comfy-router/models/pruna/p-video-2/code"}]},{"group":"Qwen","pages":[{"title":"搭配 Comfy Router 使用 Qwen Image 3.0 Pro","sidebarTitle":"Qwen Image 3.0 Pro","href":"/zh/development/comfy-router/models/qwen/qwen-image-3-0-pro/code"},{"title":"使用 Qwen Image 3.0 搭配 Comfy Router","sidebarTitle":"Qwen Image 3.0","href":"/zh/development/comfy-router/models/qwen/qwen-image-3-0/code"}]},{"group":"Recraft","pages":[{"title":"配合 Comfy Router 使用 Recraft V2","sidebarTitle":"Recraft V2","href":"/zh/development/comfy-router/models/recraft/recraftv2/code"},{"title":"使用 Comfy Router 调用 Recraft V3","sidebarTitle":"Recraft V3","href":"/zh/development/comfy-router/models/recraft/recraftv3/code"},{"title":"将 Recraft V4.1 Pro Vector 与 Comfy Router 配合使用","sidebarTitle":"Recraft V4.1 Pro Vector","href":"/zh/development/comfy-router/models/recraft/recraftv4-1-pro-vector/code"},{"title":"将 Recraft V4.1 Pro 与 Comfy Router 配合使用","sidebarTitle":"Recraft V4.1 Pro","href":"/zh/development/comfy-router/models/recraft/recraftv4-1-pro/code"},{"title":"通过 Comfy Router 使用 Recraft V4.1 Utility Pro Vector","sidebarTitle":"Recraft V4.1 Utility Pro Vector","href":"/zh/development/comfy-router/models/recraft/recraftv4-1-utility-pro-vector/code"},{"title":"将 Recraft V4.1 Utility Pro 与 Comfy Router 配合使用","sidebarTitle":"Recraft V4.1 Utility Pro","href":"/zh/development/comfy-router/models/recraft/recraftv4-1-utility-pro/code"},{"title":"使用 Recraft V4.1 Utility Vector 搭配 Comfy Router","sidebarTitle":"Recraft V4.1 Utility Vector","href":"/zh/development/comfy-router/models/recraft/recraftv4-1-utility-vector/code"},{"title":"将 Recraft V4.1 Utility 与 Comfy Router 搭配使用","sidebarTitle":"Recraft V4.1 Utility","href":"/zh/development/comfy-router/models/recraft/recraftv4-1-utility/code"},{"title":"结合 Comfy Router 使用 Recraft V4.1 Vector","sidebarTitle":"Recraft V4.1 Vector","href":"/zh/development/comfy-router/models/recraft/recraftv4-1-vector/code"},{"title":"搭配 Comfy Router 使用 Recraft V4.1","sidebarTitle":"Recraft V4.1","href":"/zh/development/comfy-router/models/recraft/recraftv4-1/code"},{"title":"在 Comfy Router 中使用 Recraft V4 Pro","sidebarTitle":"Recraft V4 Pro","href":"/zh/development/comfy-router/models/recraft/recraftv4-pro/code"},{"title":"将 Recraft V4 Styles Pro Vector 与 Comfy Router 配合使用","sidebarTitle":"Recraft V4 Styles Pro Vector","href":"/zh/development/comfy-router/models/recraft/recraftv4-styles-pro-vector/code"},{"title":"将 Recraft V4 Styles Pro 与 Comfy Router 配合使用","sidebarTitle":"Recraft V4 Styles Pro","href":"/zh/development/comfy-router/models/recraft/recraftv4-styles-pro/code"},{"title":"使用 Recraft V4 Styles Vector 与 Comfy Router","sidebarTitle":"Recraft V4 Styles Vector","href":"/zh/development/comfy-router/models/recraft/recraftv4-styles-vector/code"},{"title":"使用 Recraft V4 Styles 搭配 Comfy Router","sidebarTitle":"Recraft V4 Styles","href":"/zh/development/comfy-router/models/recraft/recraftv4-styles/code"},{"title":"搭配 Comfy Router 使用 Recraft V4","sidebarTitle":"Recraft V4","href":"/zh/development/comfy-router/models/recraft/recraftv4/code"}]},{"group":"Runway","pages":[{"title":"将 Aleph 2 与 Comfy Router 配合使用","sidebarTitle":"Aleph 2","href":"/zh/development/comfy-router/models/runway/aleph2/code"},{"title":"通过 Comfy Router 使用 Gen 4 Image","sidebarTitle":"Gen 4 Image","href":"/zh/development/comfy-router/models/runway/gen4-image/code"},{"title":"将 Gen 4 Turbo 与 Comfy Router 配合使用","sidebarTitle":"Gen 4 Turbo","href":"/zh/development/comfy-router/models/runway/gen4-turbo/code"}]},{"group":"Synclabs","pages":[{"title":"通过 Comfy Router 使用 Sync 3","sidebarTitle":"Sync 3","href":"/zh/development/comfy-router/models/synclabs/sync-3/code"}]},{"group":"Tencent","pages":[{"title":"使用混元 3D Part 配合 Comfy Router","sidebarTitle":"混元 3D Part","href":"/zh/development/comfy-router/models/tencent/hunyuan-3d-part/code"},{"title":"通过 Comfy Router 使用混元3D智能拓扑","sidebarTitle":"混元3D智能拓扑","href":"/zh/development/comfy-router/models/tencent/hunyuan-3d-smart-topology/code"},{"title":"使用 Comfy Router 调用混元3D 纹理编辑","sidebarTitle":"混元 3D Texture Edit","href":"/zh/development/comfy-router/models/tencent/hunyuan-3d-texture-edit/code"},{"title":"通过 Comfy Router 使用混元 3D Uv","sidebarTitle":"混元 3D Uv","href":"/zh/development/comfy-router/models/tencent/hunyuan-3d-uv/code"}]},{"group":"Veed","pages":[{"title":"通过 Comfy Router 使用 Clean Audio Video","sidebarTitle":"Clean Audio Video","href":"/zh/development/comfy-router/models/veed/clean-audio-video/code"},{"title":"通过 Comfy Router 使用 Clean Audio","sidebarTitle":"Clean Audio","href":"/zh/development/comfy-router/models/veed/clean-audio/code"},{"title":"使用 Fabric 1.0 与 Comfy Router","sidebarTitle":"Fabric 1.0","href":"/zh/development/comfy-router/models/veed/fabric-1-0/code"},{"title":"使用 Comfy Router 调用 Lipsync 2.0","sidebarTitle":"Lipsync 2.0","href":"/zh/development/comfy-router/models/veed/lipsync-2-0/code"},{"title":"使用 Comfy Router 进行快速视频背景移除","sidebarTitle":"快速视频背景移除","href":"/zh/development/comfy-router/models/veed/video-background-removal-fast/code"},{"title":"使用 Comfy Router 进行视频背景移除绿幕处理","sidebarTitle":"视频背景移除绿幕","href":"/zh/development/comfy-router/models/veed/video-background-removal-green-screen/code"},{"title":"通过 Comfy Router 使用视频背景移除","sidebarTitle":"视频背景移除","href":"/zh/development/comfy-router/models/veed/video-background-removal/code"}]},{"group":"Veo","pages":[{"title":"将 Veo 3.1 Fast Generate 001 与 Comfy Router 配合使用","sidebarTitle":"Veo 3.1 Fast Generate 001","href":"/zh/development/comfy-router/models/veo/veo-3-1-fast-generate-001/code"},{"title":"使用 Comfy Router 调用 Veo 3.1 Generate 001","sidebarTitle":"Veo 3.1 Generate 001","href":"/zh/development/comfy-router/models/veo/veo-3-1-generate-001/code"},{"title":"使用 Comfy Router 调用 Veo 3.1 Lite Generate 001","sidebarTitle":"Veo 3.1 Lite Generate 001","href":"/zh/development/comfy-router/models/veo/veo-3-1-lite-generate-001/code"}]},{"group":"Wan","pages":[{"title":"通过 Comfy Router 使用 HappyHorse 1.0 I2V","sidebarTitle":"HappyHorse 1.0 I2V","href":"/zh/development/comfy-router/models/wan/happyhorse-1-0-i2v/code"},{"title":"使用 HappyHorse 1.0 R2V 搭配 Comfy Router","sidebarTitle":"HappyHorse 1.0 R2V","href":"/zh/development/comfy-router/models/wan/happyhorse-1-0-r2v/code"},{"title":"使用 Comfy Router 调用 HappyHorse 1.0 T2V","sidebarTitle":"HappyHorse 1.0 T2V","href":"/zh/development/comfy-router/models/wan/happyhorse-1-0-t2v/code"},{"title":"使用 Comfy Router 调用 HappyHorse 1.0 Video Edit","sidebarTitle":"HappyHorse 1.0 视频编辑","href":"/zh/development/comfy-router/models/wan/happyhorse-1-0-video-edit/code"},{"title":"将 HappyHorse 1.1 I2V 与 Comfy Router 配合使用","sidebarTitle":"HappyHorse 1.1 I2V","href":"/zh/development/comfy-router/models/wan/happyhorse-1-1-i2v/code"},{"title":"通过 Comfy Router 使用 HappyHorse 1.1 R2V","sidebarTitle":"HappyHorse 1.1 R2V","href":"/zh/development/comfy-router/models/wan/happyhorse-1-1-r2v/code"},{"title":"使用 Comfy Router 调用 HappyHorse 1.1 T2V","sidebarTitle":"HappyHorse 1.1 T2V","href":"/zh/development/comfy-router/models/wan/happyhorse-1-1-t2v/code"},{"title":"通过 Comfy Router 使用 Wan 2.5 I2I Preview","sidebarTitle":"Wan 2.5 I2I Preview","href":"/zh/development/comfy-router/models/wan/wan2-5-i2i-preview/code"},{"title":"使用 Comfy Router 调用 Wan 2.5 I2V Preview","sidebarTitle":"Wan 2.5 I2V Preview","href":"/zh/development/comfy-router/models/wan/wan2-5-i2v-preview/code"},{"title":"将 Wan 2.5 T2I Preview 与 Comfy Router 配合使用","sidebarTitle":"Wan 2.5 T2I Preview","href":"/zh/development/comfy-router/models/wan/wan2-5-t2i-preview/code"},{"title":"使用 Comfy Router 调用 Wan 2.5 T2V Preview","sidebarTitle":"Wan 2.5 T2V Preview","href":"/zh/development/comfy-router/models/wan/wan2-5-t2v-preview/code"},{"title":"使用 Comfy Router 调用 Wan 2.6 I2V","sidebarTitle":"Wan 2.6 I2V","href":"/zh/development/comfy-router/models/wan/wan2-6-i2v/code"},{"title":"通过 Comfy Router 使用 Wan 2.6 R2V","sidebarTitle":"Wan 2.6 R2V","href":"/zh/development/comfy-router/models/wan/wan2-6-r2v/code"},{"title":"通过 Comfy Router 使用 Wan 2.6 T2V","sidebarTitle":"Wan 2.6 T2V","href":"/zh/development/comfy-router/models/wan/wan2-6-t2v/code"},{"title":"使用 Comfy Router 调用 Wan 2.7 I2V","sidebarTitle":"Wan 2.7 I2V","href":"/zh/development/comfy-router/models/wan/wan2-7-i2v/code"},{"title":"使用 Comfy Router 调用 Wan 2.7 R2V","sidebarTitle":"Wan 2.7 R2V","href":"/zh/development/comfy-router/models/wan/wan2-7-r2v/code"},{"title":"使用 Comfy Router 调用 Wan 2.7 T2V","sidebarTitle":"Wan 2.7 T2V","href":"/zh/development/comfy-router/models/wan/wan2-7-t2v/code"},{"title":"搭配 Comfy Router 使用 Wan 2.7 Video Edit","sidebarTitle":"Wan 2.7 Video Edit","href":"/zh/development/comfy-router/models/wan/wan2-7-videoedit/code"},{"title":"将 Wan 3.0 Video Prime 与 Comfy Router 配合使用","sidebarTitle":"Wan 3.0 Video Prime","href":"/zh/development/comfy-router/models/wan/wan3-0-video-prime/code"},{"title":"通过 Comfy Router 使用 Wan 3.0 Video","sidebarTitle":"Wan 3.0 Video","href":"/zh/development/comfy-router/models/wan/wan3-0-video/code"}]},{"group":"WaveSpeed","pages":[{"title":"将 Flashvsr 与 Comfy Router 配合使用","sidebarTitle":"Flashvsr","href":"/zh/development/comfy-router/models/wavespeed/flashvsr/code"},{"title":"将 Seedvr 2 与 Comfy Router 配合使用","sidebarTitle":"Seedvr 2","href":"/zh/development/comfy-router/models/wavespeed/seedvr2/code"},{"title":"将 Ultimate Image Upscaler 与 Comfy Router 配合使用","sidebarTitle":"Ultimate Image Upscaler","href":"/zh/development/comfy-router/models/wavespeed/ultimate-image-upscaler/code"}]},{"group":"xAI","pages":[{"title":"将 Grok Imagine Image 2.0 与 Comfy Router 配合使用","sidebarTitle":"Grok Imagine Image 2.0","href":"/zh/development/comfy-router/models/xai/grok-imagine-image-2-0/code"},{"title":"配合 Comfy Router 使用 Grok Imagine Image Pro","sidebarTitle":"Grok Imagine Image Pro","href":"/zh/development/comfy-router/models/xai/grok-imagine-image-pro/code"},{"title":"配合 Comfy Router 使用 Grok Imagine Image Quality","sidebarTitle":"Grok Imagine Image Quality","href":"/zh/development/comfy-router/models/xai/grok-imagine-image-quality/code"},{"title":"使用 Grok Imagine Image 与 Comfy Router","sidebarTitle":"Grok Imagine Image","href":"/zh/development/comfy-router/models/xai/grok-imagine-image/code"},{"title":"将 Grok Imagine Video 1.5 Lite 与 Comfy Router 配合使用","sidebarTitle":"Grok Imagine Video 1.5 Lite","href":"/zh/development/comfy-router/models/xai/grok-imagine-video-1-5-lite/code"},{"title":"结合 Comfy Router 使用 Grok Imagine Video 1.5 Preview","sidebarTitle":"Grok Imagine Video 1.5 Preview","href":"/zh/development/comfy-router/models/xai/grok-imagine-video-1-5-preview/code"},{"title":"将 Grok Imagine Video 1.5 与 Comfy Router 配合使用","sidebarTitle":"Grok Imagine Video 1.5","href":"/zh/development/comfy-router/models/xai/grok-imagine-video-1-5/code"},{"title":"搭配 Comfy Router 使用 Grok Imagine Video","sidebarTitle":"Grok Imagine Video","href":"/zh/development/comfy-router/models/xai/grok-imagine-video/code"}]},{"group":"Openrouter","pages":[{"title":"配合 Comfy Router 使用 Chat Completions","sidebarTitle":"Chat Completions","href":"/zh/development/comfy-router/models/openrouter/chat-completions/code"}]}]}]},{"group":"Comfy CLI","pages":[{"title":"Comfy CLI 入门","sidebarTitle":"快速开始","href":"/zh/comfy-cli/getting-started"},{"title":"Comfy CLI 命令参考","sidebarTitle":"命令参考","href":"/zh/comfy-cli/reference"},{"title":"Comfy CLI 故障排查:安装与环境修复","sidebarTitle":"故障排除","href":"/zh/comfy-cli/troubleshooting"}]},{"group":"规范","pages":[{"group":"Workflow JSON","pages":[{"title":"工作流 JSON","href":"/zh/specs/workflow_json"},{"title":"工作流 JSON 0.4","href":"/zh/specs/workflow_json_0.4"}]},{"group":"节点定义","pages":[{"title":"节点定义 JSON","href":"/zh/specs/nodedef_json"},{"title":"节点定义 JSON 1.0","href":"/zh/specs/nodedef_json_1_0"}]}]},{"group":"Demo Apps","pages":[{"title":"演示应用","mode":"wide","href":"/zh/development/samples/overview"}]}]},{"tab":"自定义节点","pages":[{"title":"自定义节点","href":"/zh/custom-nodes/intro"}]},{"tab":"支持","pages":[{"title":"支持","href":"/zh/support/contact-support"}]},{"tab":"Cloud API 参考文档","pages":[{"title":"Cloud API 参考文档","href":"/zh/api-reference/cloud/workflow/get-information-about-current-prompt-executions"}]}]},{"language":"ja","footer":{"socials":{"github":"https://github.com/Comfy-Org/ComfyUI","x":"https://x.com/ComfyUI","discord":"https://discord.com/invite/comfyorg","youtube":"https://www.youtube.com/@comfyorg"},"links":[{"header":"リソース","items":[{"label":"インストール","href":"/ja/installation/system_requirements"},{"label":"チュートリアル","href":"/ja/tutorials/basic/text-to-image"},{"label":"開発","href":"/ja/development/overview"}]},{"header":"プロダクト","items":[{"label":"機能","href":"https://www.comfy.org/?utm_source=docs"},{"label":"ギャラリー","href":"https://www.comfy.org/gallery?utm_source=docs"},{"label":"ダウンロード","href":"https://www.comfy.org/download?utm_source=docs"}]},{"header":"会社情報","items":[{"label":"概要","href":"https://www.comfy.org/about?utm_source=docs"},{"label":"採用情報","href":"https://www.comfy.org/careers?utm_source=docs"},{"label":"利用規約","href":"https://www.comfy.org/terms-of-service?utm_source=docs"},{"label":"プライバシーポリシー","href":"https://www.comfy.org/privacy-policy?utm_source=docs"}]}]},"navbar":{"links":[{"href":"/ja/tutorials/partner-nodes/pricing","label":"料金"},{"href":"https://comfy.org/download?utm_source=docs","label":"ダウンロード"}],"primary":{"type":"button","label":"Comfy Cloud","href":"https://comfy.org/cloud?utm_source=docs"}},"pages":[{"title":"ja","href":"/ja/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately"}]},{"language":"ko","footer":{"socials":{"github":"https://github.com/Comfy-Org/ComfyUI","x":"https://x.com/ComfyUI","discord":"https://discord.com/invite/comfyorg","youtube":"https://www.youtube.com/@comfyorg"},"links":[{"header":"리소스","items":[{"label":"설치","href":"/ko/installation/system_requirements"},{"label":"튜토리얼","href":"/ko/tutorials/basic/text-to-image"},{"label":"개발","href":"/ko/development/overview"}]},{"header":"제품","items":[{"label":"기능","href":"https://www.comfy.org/?utm_source=docs"},{"label":"갤러리","href":"https://www.comfy.org/gallery?utm_source=docs"},{"label":"다운로드","href":"https://www.comfy.org/download?utm_source=docs"}]},{"header":"회사 정보","items":[{"label":"소개","href":"https://www.comfy.org/about?utm_source=docs"},{"label":"채용","href":"https://www.comfy.org/careers?utm_source=docs"},{"label":"이용약관","href":"https://www.comfy.org/terms-of-service?utm_source=docs"},{"label":"개인정보 처리방침","href":"https://www.comfy.org/privacy-policy?utm_source=docs"}]}]},"navbar":{"links":[{"href":"/ko/tutorials/partner-nodes/pricing","label":"가격 정책"},{"href":"https://comfy.org/download?utm_source=docs","label":"다운로드"}],"primary":{"type":"button","label":"Comfy Cloud","href":"https://comfy.org/cloud?utm_source=docs"}},"pages":[{"title":"ko","href":"/ko/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately"}]},{"language":"es","pages":[{"title":"es","href":"/es/api-reference/router/comfy-router/submit-a-partner-model-run-to-the-queue-and-return-immediately"}]}]},"basePath":"","title":"Submit a partner model run to the queue and return immediately. - ComfyUI","buildId":"dpl_DTau1J5HqS9UTgVSDwGksstFWtPa","deploymentId":"dpl_DTau1J5HqS9UTgVSDwGksstFWtPa","dynamics":["c2aa737661","2b790eda92","b0f84f53ff","a9bb46feb3"],"chunks":["OpenApiReferenceProvider-5FCzAcfS.js","utils-SLtAG4EZ.js","cloneDeep-izs3Hzxb.js","_Uint8Array-BVIqJ90l.js","isObjectLike-C8vmzPEN.js","isArray-Dcu1dQ5t.js","utils-2DZi8ZMu.js","toString-BX-iyh8G.js","isSymbol-CSH9U2Gm.js","addUniqueKeysToSchema-D7J3nkzE.js","snippetPresets-D0Alv0AH.js","style-to-object-BY3JEAdk.js","v4-DIgz8zy6.js","conditional-requirements-CFM0id0Q.js","ApiExamples-BI4qNJ2c.js","isEqual-BfaiBbcl.js","usePlaygroundInputsStore-BD3uyr8j.js","shallow-D8iEBr5z.js","getApiPlaygroundDisplay-CgNP4lzR.js","CodeSnippet-CX-QHuMs.js","CodeSnippets-VlXE-ZUf.js","Page-D9ithiIZ.js","getPastedJson-DYNQkZ1M.js","icon-CzacdwOi.js","MethodPill-2JVqoYKi.js","DuplicateIcon-_xVXs-U8.js","createIcon-BRHrweLo.js","DynamicMarkdown-mQG_iQiE.js","SectionHeading-DMpJzv8f.js","axios-vUo_bRtp.js","Markdown-5FGIym-8.js","clsx-D-TRO5q5.js","lib-DuNMoZ05.js","lib-B8HbPgcC.js","html-void-elements-mCSPHezU.js","dist-CdrJecqK.js","katex-YMM-FMeD.js","marked.esm-CZWythHk.js","AssistantPageLink-CHlcWBLM.js"]}