Create Camera Orbit - ComfyUI Built-in Node Documentation

Builds a rig of cameras around the first camera’s target: a turntable by default, a tilted sweep when pitch is set, and optionally views straight down and up. Render Mesh renders one image per camera and Bake Texture From Views projects them back onto the mesh.

Inputs

Parameter	Description	Data Type	Required	Range
`camera_info`	First camera of the orbit. A camera list orbits every camera in it.	LOAD3D_CAMERA	Yes	-
`count`	Cameras evenly spaced along the sweep. Default: 4.	INT	Yes	1 to 64
`yaw`	Total turn around the target, in Create Camera Info’s yaw direction. Whole turns stop one step short of the first camera; other sweeps end on the last camera. Default: 360.0.	FLOAT	Yes	-720.0 to 720.0 (step 1.0)
`pitch`	Total tilt over the target, positive rising like Create Camera Info’s pitch; past 90 the cameras pass over the top. Whole turns loop like `yaw`. Default: 0.0.	FLOAT	Yes	-720.0 to 720.0 (step 1.0)
`poles`	Views straight down and/or up at the target, added after the orbit. Their image top points away from the first camera. Default: `"none"`.	COMBO	Yes	`"none"` `"top"` `"bottom"` `"top and bottom"`

Outputs

Output Name	Description	Data Type
`camera_info`	The camera list of the rig, in orbit order followed by the pole views.	LOAD3D_CAMERA

This documentation was AI-generated. If you find any errors or have suggestions for improvement, please feel free to contribute! Edit on GitHub

Source fingerprint (SHA-256): b251efc969f8db7cf03527594be3bbd2af037f1ebb56bdf508bf264ddd9f8c08